MultiMobile User Guide
MT5634ZLX/FE Installation in NT 3.51
1.Insert the MT5634ZLX/FE card into an open PCMCIA slot.
2.Run Windows NT.
3.Login with full access (i.e., ADMINISTRATOR).
4.Open Program Manager Main group Control Panel Network.
5.Click Yes to install network components.
6.Enter the correct path for NT installation media
7.Click “Do not detect for the network adapter”.
8.Open the Network Adapter Card selection box.
9.Select <OTHER> REQUIRES DISK FROM MANUFACTURER.
10.Click Continue.
11.Insert the driver disk into floppy disk drive, then enter the correct path (A:\).
12.Select the MT5634ZLX/FE, then click OK.
13.A dialog box is displayed for the driver settings change.
14.Give appropriate system resources to the MT5634ZLX/FE (the settings must be unique for this device). Recommended resources:
·I/O Base Address: 300. Possible alternative: 220, 320, 340
·Interrupt (IRQ): IRQ 5. If your laptop has multimedia devices, a higher interrupt (e.g., IRQ:11) may be needed.
·Base Memory: D000. Possible alternative: D800
· COM Port: COM2 to COM4. Select one of the COM ports that is not in use by other communication devices.
15.When all settings are completed, click OK. Windows NT will load network and grant configurations for:
·NWLink
·TCP/IP
·Netbeui
Typically the configurations are unique for each network. If you want to change them, ask your network administrator for help.
16.Once all network softwares are loaded, click OK. The configuration and bindings for the MT5634ZLX/FE are confirmed. Answer the questions accordingly.
17.Connect to your network using the provided Ethernet LAM
18.Reboot the system.
28 | MT5634ZLX/FE |