MultiModemDSVD User Guide | 5 Solving Problems |
string to replace X4 with X3, which will cause the modem to ignore dial tones (note,
4however, that X3 is not allowed in some countries, such as France and Spain).
If the modem reports BUSY, the other number might be busy, in which case you should try again later, or it might indicate that you have failed to add a 9, prefix to the phone number if you must dial 9 for an outside line.
If you must dial 9 to get an outside line, the easiest way to dial it automatically is to include it in the modem’s dial prefix, e.g., ATDT9,. Note the comma, which inserts a pause before the number is dialed. By inserting 9, into the dial prefix, you do not have to include it in each directory entry.
To change the dial prefix in Windows HyperTerminal, select Connect from the Call menu, click Dialing Properties, and type 9 in the local and long distance boxes in How I dial from this location.
If the modem reports NO ANSWER, the other system has failed to go
4you might have dialed a wrong number. Check the number.
If the modem reports NO CARRIER, the phone was answered at the other end, but no connection was made. You might have dialed a wrong number, and a per- son answered instead of a computer, or you might have dialed the correct number but the other computer or software was turned off or faulty. Check the number and try again, or try calling another system to make sure your modem is working. Also, try calling the number on your telephone. If you hear harsh sounds, then another modem is answering the call, and the modems might be having problems negotiating because of modem incompatibilities or line noise. Try connecting at a lower speed.
The Modem4Disconnects While Online
If you have Call Waiting on the same phone line as your modem, it can interrupt your connection when someone tries to call you. If you have Call Waiting, dis- able it before each call. In most telephone areas in North America, you can disable Call Waiting by preceding the telephone number with *70 (check with your local telephone company).
You can automatically disable Call Waiting by including the disabling code in the modem’s dial prefix (e.g.,
4has Call Waiting, and select the correct code for your phone service.
If you have extension phones on the same line as your modem, you or someone else can interrupt the connection by picking up another phone. If this is a fre- quent problem, disconnect the extension phones before using the modem, or install another phone line especially for the modem.
Check for loose connections between the modem and the computer, the tele-
4phone jack, and AC power.
You might have had a poor connection because of line conditions or the problem might have originated on the other end of the line. Try again.
52