Multi-Tech Systems MT5600DSVD manual FCC Part, Industry Canada

Page 62

MultiModemDSVD User Guide	A Regulatory Compliance
Manufacturer:	Multi-Tech Systems, Inc.
Model Number:	MT5600DSVD
FCC Registration No:	AU7USA-24713-M5-E
Ringer Equivalence:	0.3B
Modular Jack (USOC):	RJ11C or RJ11W (single line)
Service Center in USA:	Multi-Tech Systems, Inc.
	2205 Woodale Drive
	Mounds View, MN 55112
	U.S.A.
	(763) 785-3500
	(763) 785-9874 Fax

FCC Part 15

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installa- tion. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful inter- ference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful inter- ference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Plug the equipment into an outlet on a circuit different from that to which the re- ceiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC rules. Operation of this device is sub- ject to the following conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference that may cause undesired operation.

WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Industry Canada

This Class B digital apparatus meets all requirements of the Canadian Interference- Causing Equipment Regulations.

Cet appareil numérique de la classe B respecte toutes les exigences du Reglement Canadien sur le matériel brouilleur.

57

Image 62

Contents Page Record of Revisions Introduction AT Commands, S-Registers & Result Codes Appendix E Upgrading the Modem Introduction Product Description FeaturesIntroduction Data What Is in Your Modem Package? Related ManualsInstallation We supply Safety WarningsWhat You Will Need You supplyOpening the Modem Mount the FeetChange the Speaker Jumper Changing the Speaker Jumper Location of speaker jumperLine Connection Connect the Modem to Your SystemRS232 Connection Phone Connection Power ConnectionPower-On Test Microphone ConnectionRemoving Your Old Modem Driver Install the Modem DriverInstalling the Modem Driver Install and Configure Your Software Operation Front Panel Configuring the Modem Connecting to the InternetDial-Up Networking To install and run Dial-Up Networking in Windows 95 orTo dial your Internet access provider Dial-Up Networking in Windows 95/98Dial-Up Networking in Windows NT To install Dial-Up NetworkingDial-Up Networking in Windows Me Select Start Settings Network and Dial-up Connections Dial-Up Networking in WindowsVoice Operation To Originate a Voice Call in Speakerphone ModeFax Operation To Answer a Dsvd Call Using the Headset To Answer a Voice Call in Speakerphone ModeTo Originate a Dsvd Call Using the Headset References AT Commands Registers Result Codes AT Commands AT Command Summary Hook Control Echo Command Mode CharactersDS=y Dial Stored Telephone Number Information RequestDisplay Legacy Parameters Monitor Speaker VolumeMonitor Speaker Mode Modulation HandshakePulse Dialing Return Online to Data ModeResult Codes Enable/Disable Select RegisterResult Code Selection Modem ResetConnect Message Control Long Space DisconnectData Terminal Ready DTR Control Error Correction ModesData Carrier Detect DCD Control Modem-Initiated Flow Control22bis Guard Tone Control Load Factory Settings42bis Data Compression Telephone Jack ControlTest Commands Communications ModeAsynchronous Communications Mode Pulse Dial Make/Break RatioSelect Profile for Hard Reset Display Current ConfigurationStore Current Configuration Display Last Connection StatisticsZy=x Store Telephone Number Line Signal LevelLine Signal Quality Data Compression Control\Bn Transmit Break PCM Code Selection\An Maximum MNP Block Size \Kn Break Control\Nn Error Correction Mode Selection \Vn Single Line Connect MessageModulation Selection SubparametersMNP Extended Services Flash Memory Download Command #CID=n Caller IDDistinctive Ring Control Command +++ATCR Escape Sequence Voice CommandsCommand $SBn Serial Port Baud Rate Command -SMS=nData/DSVD ModeCommand #CLS=n Data, Fax, or Voice/Audio Select Dsvd Enable/DisableCommand #BDR=n Baud Rate Select Command #MDL? Identify ModelRegister Unit Range Default Description RegistersS32 S37 Register Unit Range Default Description S86 Result Codes Terse Verbose DescriptionProtocol ALT +FCERROR Solving Problems None of the Indicators Light Modem Does Not Respond to Commands LightModem Dials But Cannot Connect Modem4Disconnects While Online Data Is Being Lost Modem4Cannot Connect When AnsweringFile Transfer4Is Slower Than It Should Be Fax and Data4Software Can’t Run at the Same Time There Are Garbage4 Characters on the MonitorModem4Doesn’t Work with Caller ID Appendixes Appendix a Regulatory Compliance FCC Part 68 TelecomFCC Part Industry CanadaFax Branding Statement Canadian Limitations NoticeNew Zealand Telecom Warning Notice EMC, Safety, and R&TTE Directive ComplianceInternational Modem Restrictions South African Notice Appendix B Technical Specifications MultiModemDSVD User Guide Technical Specifications Voice Compression Test procedure Local Analog Loopback Test V.54 LoopRemote Digital Loopback Test V.54 Loop Figure C-2. Remote digital loopback testLocal Digital Loopback Test V.54 Loop Figure C-3. Local digital loopback testMultiModemDSVD User Guide Loopback Tests Service Limited WarrantyOnline Warranty Registration North American ProductsTechnical Support International ProductsOrdering Accessories Internet SitesUpgrade Overview Identify the Modem FirmwareIdentify the Current Firmware Version Download the Upgrade FileExtract the Upgrade Files Clear Your Stored ParamentersUpgrade the Modem’s Firmware Restore Your ParametersIndex MultiModemDSVD User Guide Index MultiModemDSVD User Guide Index MultiModemDSVD User Guide Index