Multi-Tech Systems MT5634ZBA-DID manual Record of Revisions, Revision Date Description, Trademarks

Page 2

User Guide

Product Number S000234C Revision C

MultiModemDID (MT5634ZBA-DID)

All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from Multi-Tech Systems, Inc.

Copyright © 2002-2009 by Multi-Tech Systems, Inc.

Multi-Tech Systems, Inc. makes no representations or warranties with respect to the contents hereof and specifically disclaims any implied warranties of merchantability or fitness for any particular pur- pose. Furthermore, Multi-Tech Systems, Inc. reserves the right to revise this publication and to make changes in the content hereof without obligation of Multi-Tech Systems, Inc. to notify any person or or- ganization of such revisions or changes.

Record of Revisions

Revision Date

Description

A09/18/02 Supports V.92. Initial release of manual for publication on CD.

B05/18/07 Revised tech support listing and warranty/repair descriptions.

C01/02/08 Updated tech support contact listing.

05/15/09 Added a link to the Multi-Tech Web site for warranty information

Trademarks

MultiModemZBA, Multi-Tech, and the Multi-Tech logo are trademarks of Multi-Tech Systems, Inc.

Adobe and Acrobat are trademarks of Adobe Systems Incorporated. MNP is a trademark of Microcom, Inc. Microsoft, Windows, Windows 95, Windows 98, Windows Me, Windows NT, Windows 2000, and Windows XP are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. All other brand and product names mentioned in this publication are trademarks or registered trademarks of their respective companies.

Warranty

For the Multi-Tech Warranty, see the Multi-Tech Web site at http://www.multitech.com

Patents

This device is covered by one or more of the following patents: 6,031,867; 6,012,113; 6,009,082; 5,905,794; 5,864,560; 5,815,567; 5,815,503; 5,812,534; 5,809,068; 5,790,532; 5,764,628; 5,764,627; 5,754,589; D394,250; 5,724,356; 5,673,268; 5,673,257; 5,644,594; 5,628,030; 5,619,508; 5,617,423; 5,600,649; 5,592,586; 5,577,041; 5,574,725; D374,222; 5,559,793; 5,546,448; 5,546,395; 5,535,204; 5,500,859; 5,471,470; 5,463,616; 5,453,986; 5,452,289; 5,450,425; D361,764; D355,658; D355,653; D353,598; D353,144; 5,355,365; 5,309,562; 5,301,274. Other patents pending.

World Headquarters

Multi-Tech Systems, Inc.

2205 Woodale Drive Mounds View, MN 55112

Telephone (763) 785-3500 or (800) 328-9717 Fax (763) 785-9874

Technical Support

 

 

 

Country

By Email

By Phone

Europe, Middle East, Africa:

support@multitech.co.uk

+(44)

118 959 7774

U.S., Canada, all others:

support@multitech.com

(800)

972-2439 or (763) 717-5863

Internet Address: http://www.multitech.com

Page 1 Page 3
Image 2
Page 1 Page 3
Contents User Guide Trademarks Record of RevisionsRevision Date Description PatentsTable of Contents MultiModemDID User Guide Contents Introduction FeaturesIntroduction and Description You Supply SafetyWe Supply Connect the Modem to Your System InstallationAssemble the Modem Connect the Modem to the AC Power Outlet Removing Your Old Modem from WindowsFrom Windows 2000, XP Operation Front Panel of the MultiModemDID ModemDid Operation OperationConnecting to the Internet Dial-Up NetworkingAT Commands, S -Registers Result Codes Communication Standard Setting AT CommandsRepeat Last Command AnswerDS=n Dial Stored Telephone Number Echo Command Mode CharactersNumber ATDT1028806127853500$123456789 Echo Online Data CharactersResult Codes Enable/Disable Monitor Speaker ModeReturn Online to Data Mode Modulation HandshakeResult Code Format Modem ResetTone Dialing Result Code OptionsData Terminal Ready DTR Control Load Factory SettingsAsynchronous Communications Mode XON/XOFF Pacing ControlStore Current Configuration Test CommandsDisplay Current Settings Store Dialing Command\Kn Break Control Online command mode. The modem receives a \Bn\Bn Transmit Break \Qn Flow Control Selection \Nn Error Correction Mode Selection\Tn Inactivity Timer \Vn Protocol Result CodeDirect Connect Enable Adaptive Answer Result Code EnableDC n AT Command Control View Numbers in BlacklistCommand +DCS=x,y Select V.44 Data Compression Cisco ConfigurationCommand Speed Response $Dn DTR DialingCommand +DS44=n V.44 Data Compression Data Compression ReportingEnable Synchronous Buffered Mode Modulation Selection SubparametersMod value Valid max-rate values bps Modem on Hold Enable CommandsCommand +PCW=n Call Waiting Enable PCM Upstream IgnoreCommand +PMHR=n Modem on Hold Initiate Command +PMHT=n Modem on Hold TimerCommand +VDR= x, y Distinctive Ring Report Other CommandsCommand +VCID=n Caller ID Selection Quick Connect ControlCommand +++ATCR Escape Sequence Command %%%ATCR Remote Configuration Escape SequenceMT5634ZBA-DID Initialization Recommendations Number of did Digits Expected Busy-Out Timer at End of CallWait for Digit Time-Out Time Digit FormatDF1 Format for Reporting Incoming did NumberDF0 DF2Page Register Unit Range Default Description RegistersValue Speed Value RateS42 Value Digital lossCarrier signal lost or not detected Command executedRing signal detected Invalid commandPage Setup Remote ConfigurationBasic Procedure Changing the Remote Escape Character Modem Does Not Respond to Commands TroubleshootingNone of the Indicators Light Modem Dials But Cannot Connect Modem Doesn’t Work with Caller ID Modem Cannot Connect When AnsweringModem Disconnects While Online Fax and Data Software Can’t Run at the Same TimeDid Troubleshooting Appendix a Regulatory Compliance FCC Part 68 TelecomCanadian Limitations Notice FCC PartFax Branding Statement Industry CanadaAppendix B Technical Specifications FaxUpgrade Overview Appendix C Upgrading the Modem’s FirmwareExtract the Upgrade Files Select Dialup Configuration Tool Appendix D Installing a Modem Under LinuxInstallation Standard Linux Serial Port DefinitionsCalling the ISP Select RH PPP DialerSymbols IndexMultiModemDID User Guide Index MultiModemDID User Guide Index
Top Page Image Contents