Multi-Tech Systems MT5634ZBA-DID manual MultiModemDID User Guide Contents

Page 4

MultiModemDID User Guide	Contents
Chapter 6 - Troubleshooting	43
None of the Indicators Light	43
The Modem Does Not Respond to Commands	43
The Modem Dials But Cannot Connect	44
The Modem Disconnects While Online	45
The Modem Cannot Connect When Answering	45
The Modem Doesn’t Work with Caller ID	45
Fax and Data Software Can’t Run at the Same Time	45
DID Troubleshooting	46
Appendix A – Regulatory Compliance	47
FCC Part 68 Telecom	47
FCC Part 15	48
Fax Branding Statement	48
Canadian Limitations Notice	48
Industry Canada	48
Appendix B – Technical Specifications	49
Appendix C - Upgrading the Modem’s Firmware	52
Appendix D - Installing a Modem Under Linux	54
Introduction	54
Standard Linux Serial Port Definitions	54
Installation	54
Setup	54
Index	54

4

Image 4

Contents User Guide Record of Revisions Revision Date DescriptionTrademarks PatentsTable of Contents MultiModemDID User Guide Contents Introduction and Description FeaturesIntroduction We Supply SafetyYou Supply Assemble the Modem InstallationConnect the Modem to Your System Connect the Modem to the AC Power Outlet Removing Your Old Modem from WindowsFrom Windows 2000, XP Operation Front Panel of the MultiModemDID ModemDid Operation OperationConnecting to the Internet Dial-Up NetworkingAT Commands, S -Registers Result Codes AT Commands Repeat Last CommandCommunication Standard Setting AnswerEcho Command Mode Characters Number ATDT1028806127853500$123456789DS=n Dial Stored Telephone Number Echo Online Data CharactersMonitor Speaker Mode Return Online to Data ModeResult Codes Enable/Disable Modulation HandshakeModem Reset Tone DialingResult Code Format Result Code OptionsLoad Factory Settings Asynchronous Communications ModeData Terminal Ready DTR Control XON/XOFF Pacing ControlTest Commands Display Current SettingsStore Current Configuration Store Dialing Command\Bn Transmit Break Online command mode. The modem receives a \Bn\Kn Break Control \Nn Error Correction Mode Selection \Tn Inactivity Timer\Qn Flow Control Selection \Vn Protocol Result CodeAdaptive Answer Result Code Enable DC n AT Command ControlDirect Connect Enable View Numbers in BlacklistCisco Configuration Command Speed ResponseCommand +DCS=x,y Select V.44 Data Compression $Dn DTR DialingCommand +DS44=n V.44 Data Compression Data Compression ReportingEnable Synchronous Buffered Mode Modulation Selection SubparametersMod value Valid max-rate values bps Commands Command +PCW=n Call Waiting EnableModem on Hold Enable PCM Upstream IgnoreCommand +PMHR=n Modem on Hold Initiate Command +PMHT=n Modem on Hold TimerOther Commands Command +VCID=n Caller ID SelectionCommand +VDR= x, y Distinctive Ring Report Quick Connect ControlCommand +++ATCR Escape Sequence Command %%%ATCR Remote Configuration Escape SequenceMT5634ZBA-DID Initialization Recommendations Busy-Out Timer at End of Call Wait for Digit Time-Out TimeNumber of did Digits Expected Digit FormatFormat for Reporting Incoming did Number DF0DF1 DF2Page Register Unit Range Default Description RegistersValue Speed Value RateS42 Value Digital lossCommand executed Ring signal detectedCarrier signal lost or not detected Invalid commandPage Basic Procedure Remote ConfigurationSetup Changing the Remote Escape Character None of the Indicators Light TroubleshootingModem Does Not Respond to Commands Modem Dials But Cannot Connect Modem Cannot Connect When Answering Modem Disconnects While OnlineModem Doesn’t Work with Caller ID Fax and Data Software Can’t Run at the Same TimeDid Troubleshooting Appendix a Regulatory Compliance FCC Part 68 TelecomFCC Part Fax Branding StatementCanadian Limitations Notice Industry CanadaAppendix B Technical Specifications FaxUpgrade Overview Appendix C Upgrading the Modem’s FirmwareExtract the Upgrade Files Appendix D Installing a Modem Under Linux InstallationSelect Dialup Configuration Tool Standard Linux Serial Port DefinitionsCalling the ISP Select RH PPP DialerSymbols IndexMultiModemDID User Guide Index MultiModemDID User Guide Index