LSI SAS6160 SDM-CLI Commands, Domain focus domain name, „ domain focus domain name, Help command

Chapter 4: SAS Domain Manager Command Line Interface SDM-CLI Commands LSISAS6160 SAS Switch User Guide

4.2SDM-CLI Commands

4.2.1Domain Command

4.2.2Help Command

There are two types of SDM-CLI commands:

„Extra-Domaincommands manage SDM-D itself and to control the domain focus of the Intra-Domain commands.

„Intra-Domaincommands manage a single domain at a time.

Each command description indicates whether the command is Extra-Domainor Intra-Domain.

NOTE: You can use shortcuts when you type commands. In the following command descriptions, the bolded letters indicate the minimum characters that are necessary to recognize the command.

(Extra-Domain) Use the domain command to perform the listed tasks.

Authority: User for domain. Admin for all other variations.

Syntax:

domain focus <domain name>

Usage:

„domain focus <domain name>

Changes the domain on which SDM-CLI is focused. Embedded SDM only supports a single domain.

(Extra-Domain) Use the help command to display the SDM-CLI command line help.

Authority: User

Syntax:

help [<command>]

Usage:

„help [<command>]

Displays detailed help for a specific command if you provide the [<command>] name. Otherwise, it displays a list of all available commands.

Page 60 LSI Corporation September 2010