Bryston SP1.7 manual THX Button

Page 11

12. THX Button

Pressing this button will engage the SP1.7’s default THX listening mode. The default mode is selected using the “EX Control” menu (see page 26).

NOTE: THX Surround EXdecoding is only available in the THX listening mode.

If the “EX Control” Option is set to OFF, selecting this function (LED green) will automatically incorporate the THX post processing option for all surround modes. Dolby Digital 5.1, DTS 5.1 and DTS-ES 6.1 bitstreams will be decoded and presented with THX post-processing.

If the “EX Control” Option is set to ON, selecting this function (LED green) will engage THX Surround EXdecoding for back channel speaker(s), and incorporate THX post processing, for Dolby Digital 5.1 bitstreams only. For DTS bitstreams, the signal will be decoded and presented with THX post-processing. THX Surround EXis only available if the back speakers are engaged. If THX Surround EXis unavailable, an error message will appear on the LCD.

If the “EX Control” Option is set to AUTO, selecting this function (LED illuminated) will engage THX Surround EXdecoding only for bitstreams that are flagged as having EX encoded content.

NOTE: not all DVDs that are recorded with THX Surround EX contain this flag.

Pressing the THX button repeatedly will toggle between the ON and DISABLE settings for THX Surround EX. The default THX mode will only be engaged when entering the THX mode from another listening mode (such as Surround or Stereo)

For 2-channel source material, the SP1.7 will synthesize surround information based on the chosen Surround Mode (see 31. for Surround Mode information), and add THX post-processing.

NOTE: If the THX listening mode is engaged, PLII Music and

NEO:6 Music are not available, due to THX requirements.

THX

(please SEE Appendix B FOR MORE Information about THX post processing)

9

Image 11
Contents SP1.7 800 632 Bryston 20-YEARWARRANTYContents SP1.7 Functional Layout AccessoriesPower Input Mode PowerStandby and IR Infrared Activity Indicator Front Panel Controls and IndicatorsPower Momentary Switch LCD Display window Using the Dynamic Range ControlMenu Control Buttons Source Selection Buttons and IndicatorsSurround Button Mode Selection ButtonsDigital Mode and Indicator Mono and Mono Downmix Modes Stereo and Stereo Downmix ModeTHX Button Available with THX Listening Mode… Mode ButtonAnalog Balance Master VolumeBypass Button Digital Audio Coaxial Inputs Rear Panel Input and Output ConnectionsBalanced and 2. Unbalanced Outputs Analog InputsTape/Recording Outputs Setting the Optical Audio Input AssignmentToslink Digital Audio Optical Inputs Aux IR Receiver RS-232 connectorRemote 12V Trigger Outputs Programming the AUX Trigger OutputSource Select Buttons SP1.7 Remote ControlIEC Power Connector Fuses Master Power SwitchSetup Buttons Mode Select ButtonsVolume/Trim Buttons Power ButtonPhoto Sensor Status LEDTo accomplish this process the following tools are needed SET UP and Calibration of the SP1.7Setting the Speaker Configuration Explanation of ‘Saved Settings per Source’ FeatureExplanation of ‘Xtra Bass’ Mode Highlight SP Setup Menu Setting the Speaker Crossover FrequencyChange the Crossover Frequency Setting the Channel DelaysSetting Channel Levels without Pink Noise Calibrating and Setting Levels/Channel to Channel BalanceSetting the THX Subwoofer Limiter or Bass Peak Level Manager Setting the Bplm with Pink NoiseEnabling DTS-ES 6.1 Decoding Setting the Bplm without Pink NoiseEnabling THX Surround EX Decoding Hightlight ES Other Settings MenuChange EX Control Setting Changing Dolby Plii Music SettingsHighlight Plii Setup Menu Center Image is a variable in Neo6 music mode only Changing DTS NEO6 SettingsAcknowledgements To change the Center ImageSurround Modes Appendix a SP1.7 Surround ModesPage Table of all available surround modes SignalDTS as per THX licensing agreements Appendix B THX InformationXLR/PHONE Example HOOK-UP DiagramsInputs SP1.7 SpecificationsSuggested Surround Speaker Placement