Operating Instructions
3.0OPERATING INSTRUCTIONS
3.1Controls and Indicators
3.1.1Display Controls
The User Interface Module informs you of the status of the UPS and lets you configure the UPS to your own needs or preferences.
The module consists of a series of Status LEDs, an LCD display window (four lines of 20 characters each), and buttons for navigation, as displayed below.
Status LEDs
Fault/Warning LED
LCD Display
Window
Alarm
Silence
Button
Navigation Buttons 
Standby Button
ESC
Buttons
Refer to the legend below to properly navigate the Nfinity User Interface.
Fault/Warning and Status LEDs
Refer to the legend below to indicate occurrence when an LED is lit.
Up
Down
ESC Escape
Enter
-Navigates cursor on display menus
-Returns to previous display screen
-Selects displayed information
Fault/Warning
Solid - A UPS fault condition has occurred. Flashing - A Warning has occurred. Consult event log.
AC Input - AC utility is available.
On Bypass - The Bypass is supplying the power.
Inverter On - The inverter is supplying the power.
Standby - Enables / disables output power
Alarm | - Mutes the audible alarm |
Silence |
On Battery - Battery is supplying power to the inverter.
AC Output - Power is available to supply the load.
17