Liebert NfinityTM manual Event Log, Active Alarms, Transfer to Bypass

Page 32

Operating Instructions

3.5.4Event Log

Accessing the Event Log enables the user to scroll through the Nfinity’s past 255 occur- rences. To open the Event Log, start at the Main Menu, select Event Log and press .

Main Menu

UPS Status

UPS Configuration

Display Date/Time

>Event Log Active Alarms Transfer to Bypass Module Replacement Service Tools

3.5.5Active Alarms

Alarms affecting the Nfinity can be viewed at the Active Alarms screen. To access the screen, go to the Main Menu, select Active Alarms and press .

Main Menu

UPS Status

UPS Configuration

Display Date/Time

Event Log

>Active Alarms Transfer to Bypass Module Replacement Service Tools

Event Log

Event: xxx/xxx xx event message event message

DD/MMM/YYYY HH:MM:SS

Press the and buttons to scroll through the Nfinity’s Event Log in chronological order. The Event Log contains the following infor- mation.

Event Number

Reference Code

 

 

 

 

 

 

 

 

 

 

 

 

 

Description

 

Event 031/255

 

 

NC09

 

 

 

 

 

 

 

 

 

Power module warning

 

 

 

 

 

 

 

 

 

 

 

 

S/N:0012200001002G1

 

 

 

 

 

 

19 MAY 2000

 

16:54:27

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Date

 

of

Time

 

of

Event Detail or

 

 

Serial Number

Event

Event

 

 

 

 

The typical event log screen will display the event number and reference code on the first line. The purpose of this code is to assist fac- tory trained service personnel in trouble- shooting. Please make a note of the code number when contacting technical support. The second line contains the event descrip- tion. The third line will have either more detail about the event, a serial number indi- cating as to which module the event occurred, or be left blank. The last line will show the date and time the event occurred.

Press ESC to go back to the Main Menu.

When an event or alarm occurs, the User Interface LCD will display the last message regardless of the default screen. See 4.1 - Active Alarms for a list of events and alarms and possible solutions. If you are unsure of the corrective action to take, contact a Liebert representative at the number listed on the back of this manual.

Active Alarms

Active Alarms Message

When an alarm sounds, the User Interface LCD will display a general explanation as to what the alarm is indicating. To view these messages in chronological order, press the and buttons.

The first line of a typical Active Alarms screen will display the reason for the alarm occurrence.

The second line will give a more specific detail of the occurrence (i.e., module serial number).

Press ESC to go back to the Main Menu.

3.5.6Transfer to Bypass

In the event of a UPS overload or failure, the UPS will transfer to bypass via its automatic bypass switch.

Main Menu

UPS Status

UPS Configuration

Display Date/Time

Event Log

Active Alarms

>Transfer to Bypass Module Replacement Service Tools

Transfer to Bypass

Press for bypass

Press ESC to cancel

28

Image 32
Contents Nfinity Power System Page Table of Contents Figures Important Safety Instructions Glossary of Symbols Features General DescriptionSystem Description Standard ComponentsNfinity weight and dimensions Front and back views 12 bay model shownNormal Mode Backup ModeAuto Restart Mode Bypass ModeMajor Components Unit FrameUser Interface Module System Control ModulePower Module Battery ModuleRequired Setup Equipment InspectionEnvironment Site PreparationUnloading Unloading the UPSStationary Mounting Cable Installation Wiring PreparationGrounding Conductor Installation Input Wiring TB1Output Wiring TB3 Connecting to External Panel Boards Input ProtectionLoad Rating Circuit BreakerSetup 1 210 VAC Setup 2 210/105 VAC210 VAC 210VAC and/or 105VACRepo switch connections Repo ConnectionCommunications COM PortsCOM1 Relay Contacts COM2 SerialControls and Indicators Fault/Warning and Status LEDsDisplay Controls ButtonsStatus LED Modes Navigating the MenuOperating Procedures Start-Up and InitializationManual Transfer to Bypass Shutting Down the UPSUPS Status Event Log Module Replacement UPS Configuration Active Alarms Service ToolsMain Menu Display Date/TimeUPS Status Screen UPS Configuration Screen Review Settings Change Configuration Settings Change Settings Menu Change SettingsAuto Restart Mode Auto Restart DelayInterval Start DayDST Mode Alarm ModeSet Date/Time ThresholdBypass Alarm Mode Enable Disable Display Date/Time UPS Configuration Screen Service Mode MenuService Mode Transfer to Bypass Active AlarmsEvent Log Module Replacement Service Tools for Liebert Global Services Engineers Clear FailuresActive Alarms User Interface Text Cause ActionOperation Power Module Battery Module Guide to LEDsModule LED Indication Control ModuleModule Replacement Removing ModulesAdding or Replacing Modules Replacing the User InterfaceMaintenance Scheduled MaintenanceProper Care Replacing Fan FiltersProduct Warranty Registration SpecificationsSpecifications Page Locations Technical Support/ServiceCompany Behind the Products