Lantronix 4100, 2100 manual Installing the UBox Hardware, Connect the UBox to Your Network

Page 11

3: Installing the UBox

The UBox package has two components: the UBox hardware and the UBox software. Both have their own settings and configuration options.

This chapter includes the following topics:

Installing the UBox Hardware

Installing the UBox Software

Uninstalling the UBox Device Server Software

Installing the UBox Hardware

Warning: Do not connect a USB device to the UBox until you have

finished installing the software and hardware. Chapter 4: Using USB Devices on the Network walks you through the process of using your USB devices.

Step 1- Connect the UBox to Your Network

2. Connect an Ethernet cable to the Ethernet port of the UBox.

2.Connect the other end of the cable to your network.

If you do not have a network, you can connect the UBox directly to the Ethernet port on your computer using an Ethernet crossover cable.

Step 2 - Connect the UBox’s Power Supply and Read the LEDs

1.Connect the power supply (included in the box) to the UBox’s power connector.

Figure 3-1. Ethernet and Power Connections

UBox 2100

UBox

		Network
	Power Supply	Connection
Network
Connection	Power Supply
	Power Supply

UBox User Guide		11

Image 11

Contents Part Number Revision D June UBox USB Device Server User GuideLantronix Corporate Headquarters TrademarkCopyright Contacts RevisionsContents Contents Changing the UBoxs SettingsCE Mark Declaration of Conformity Resetting the UBox HardwareTroubleshooting USB Devices Technical SupportDisconnect Printer for Auto Connect Remaining chapters in this guide include Using This GuidePurpose and Audience Summary of ChaptersUSB Speeds and Throughput IntroductionModel and Part Numbers Connectivity to a Network Supported DevicesCompatible USB Devices Connectivity to USB DevicesWindows Windows XP and Vista 32 bit Hub SupportRequirements Whats Inside the PackageConnect the UBox to Your Network Installing the UBoxInstalling the UBox Hardware Connect the UBox’s Power Supply and Read the LEDsUDS4100 System LEDs Installing the UBoxTo install the UBox Software Installing the UBox SoftwareUSB Devices Tab Servers Tab Displaying a UBox Uninstalling the Lantronix UBox SoftwareConnect a USB Device to the UBox Using USB Devices on the NetworkConnecting Your USB Device OverviewAction Using USB Devices on the NetworkReview the following information on the USB Devices tab Location Connect a Networked USB DeviceDevice Name StatusDisconnect Your USB Devices Multiple UBoxes and USB Devices Using Multiple UBoxes and USB DevicesCompound Devices One UBox with Multiple UsersSummary Other Ways to Connect and Disconnect USB DevicesUBox Groups on Multiple UDP Ports PC Connectivity to UBoxes and UBS DevicesUsing the UBox System Tray To use the auto connect feature Auto Connecting PrintersDisconnect Printer for Auto Connect Auto Connect EnabledFrom the Advanced menu, select Force Device Disconnect Using Forced Device DisconnectTo use Forced Device Disconnect On the USB Devices tab, select the UBox to disconnectForced Device Disconnect on the Advanced Menu Using Multi-and Single-User Connect ModesDevice Status To separate compound devices Separating Compound DevicesTypes of USB Devices Separating Compound DevicesViewing UBox Settings Changing the UBoxs SettingsServer Name Changing the UBoxs SettingsStatus column, the following may display Server #To edit the UBox’s Settings on the Access Tab Editing Server Settings Access TabConnect Mode Firmware UpgradeUpdate the following settings as desired Editing Server Settings Network Tab IP Address, Subnet Mask, and Gateway for the UBox IP AddressAssignment TCP Port Subnet MaskGateway UDP PortEditing Server Settings USB Device Configuration Tab Cfg Location/SerialNumber Following information displays at the top Connection Applying, Canceling, or Removing Server SettingsReenter Password Share Mode Updating the UBoxs Firmware Restoring Default SettingsTo restore the UBox to factory settings To update the firmwareClick the Close button UBox User Guide Update Server FirmwareEnter the following information Overriding Server Network SettingsTo override network settings You can get more information about ZeroConf at Refreshing DataTo update your computer’s settings Changing Local Software SettingsUpdating Personal Communication Settings Multicast Address Changing Local Software SettingsClient Name Update the following information as needed Updating Server Access SettingsDevice Serial # Viewing or Removing Device PasswordsTo view or remove USB device passwords Switching Between Sets of UBoxes ‹ Off TroubleshootingTroubleshooting Status Lights Before You BeginStatus Lights on UBox TroubleshootingSystem Status Lights 2 Boot-UpSystem Status Light Status 2 is Off System 2 isOn / System Off / SystemTroubleshooting UDP Ports Is Not Listed Troubleshooting Network IssuesCommunication Between your PC and the UBox To ping the UBoxFinal Step Resetting the UBox HardwarePower-Cycling or Using the Reset Button FirewallsTo boot into safe mode Rebooting the UBox into Safe Mode Using the Reset ButtonTechnical Support Troubleshooting USB DevicesTo troubleshoot problems with USB Devices To troubleshoot issues with multiple users of a USB deviceTroubleshooting Position of Status Lights on the UBox Status Light BehaviorSystem 2 red/amber blink Status Light BehaviorIf System 1 green Refer to -4. UBox Status Lights -- UBox is Running System 2 and System 3 bothSystem 2=OFF and System 3= on System 2= OFF and System 3= OFFSystem 2= on and System 3= OFF System 2= on and System 3= onTo determine Windows XP version Configuring the Windows XP FirewallTo obtain your IP address AConfiguring the Windows XP FirewallTo obtain your UDP and TCP port numbers Local Area Connection Properties Advanced Tab To obtain the Advanced Settings windowTo add your UDP Port to the firewall Advanced Settings WindowTo close the remaining windows To add your TCP port to the firewallSelect On Click the Exceptions tab UBox User Guide To access your firewall software11. Exceptions Tab 13. Add a Port Window TCP Select UDP Click OKManufacturers Name and Address Compliance UBoxCE Mark Declaration of Conformity Canada Digital Apparatus EMI StandardTranslation Australia/New ZealandDisclaimer and Supplementary Information BCompliance UBoxSLB SLP SCS SLS DSC RoHS NoticeDeclaration of Conformity CCompliance UBox Manufacturer’s Contact Lantronix Software License Agreement DLantronix Software License Agreement Lantronix Warranty

Related manuals

Manual 95 pages 52.43 Kb