Lantronix 2100, 4100 manual Disconnect Printer for Auto Connect

	Contents
Figure 4-8. Disconnect Printer for Auto Connect	24
Figure 4-9. Forced Device Disconnect on the Advanced Menu	26
Figure 4-10. USB Device Status	27
Figure 5-1. Servers Tab	30
Figure 5-2. Edit Server Configuration – Access Tab	32
Figure 5-3. Network Tab	34
Figure 5-4. Edit Server Configuration – USB Device Configuration Tab	37
Figure 5-5. Device Configuration Window	38
Figure 5-6. Firmware Update Notification Window	40
Figure 5-7. Servers Tab	41
Figure 5-8. Update Server Firmware	41
Figure 5-9. Override Server Network Settings Window	42
Figure 6-1. Local Settings Tab	45
Figure 6-2. Edit Local Server Access Window	46
Figure 7-1. Status Lights on UBox 4100	50
Figure 7-2. Status Lights on UBox 2100	50
Figure 7-3. Resetting the UBox 4100	56
Figure 7-4. Resetting the UBox 2100	56
Figure 8-1. Position of Status Lights on the UBox	59
Figure 8-2. UBox 2100 LEDs	60
Figure 8-3. UBox Status Lights—UBox is Booting UP	60
Figure 8-4. UBox Status Lights -- UBox is Running	62
Figure 8-5. IP Address on Servers Tab	64
Figure 8-6. Local Area Connection Properties – Advanced Tab	65
Figure 8-7. Advanced Settings Window	66
Figure 8-8. Service Settings –Adding a UDP	66
Figure 8-9. Service Settings – Adding a TCP	67
Figure 8-10. Windows Firewall Window	68
Figure 8-11. Exceptions Tab	69
Figure 8-12. Add a Port Window - UDP	69
Figure 8-13. Add a Port Window - TCP	70

UBox User Guide 6