Lantronix 4100, 2100 manual Changing Local Software Settings, Client Name, Multicast Address

6: Changing Local Software Settings

Figure 6-1. Local Settings Tab

2.In the Personal Communications Settings area, update the following information as needed:

Client Name	Name of your computer that is broadcast to the UBox and to
	other users on the network. The default name is the computer
	name specified when your computer was first set up. You can
	enter a different name in this field.
UDP Port	This is the UDP port number that the UBox software uses to
	discover UBox hardware on your network. The default value is
	10010. If your UBox hardware is set to broadcast on a
	different port number, you must change the UDP port number
	here to the same value.
Multicast Address	This is the multicast address that the UBox software uses to
	discover UBox hardware on your network. The default value is
	239.255.176.42. If the UBox hardware is set to broadcast on a
	different address, you must change the address here to the
	same value.

3.Do one of the following:

‹To cancel the changes you made, click the Cancel Changes button.

‹To restore default values, click the Restore Defaults button.

‹To save your changes, click the Apply Changes button.

UBox User Guide 45