Lantronix 4100, 2100 manual Location/Serial, Number, Cfg

Page 37

5: Changing the UBox's Settings

1.On the Edit Server Configuration window, click the USB Device Configuration tab.

Figure 5-4. Edit Server Configuration – USB Device Configuration Tab

2.Update the following settings as desired:

Server Serial No. (View-only) Corresponds to the UBox’s MAC/Network

	address (printed on the bottom of your UBox hardware).
Device Name	Name that is programmed into your USB device by its
	manufacturer. This name may different from the actual
	name and model number of your device. For example, if
	you have an HP Deskjet 882 printer, it may appear as HP
	Deskjet 880 or HP Printer. Some USB devices do not have
	names programmed into them. For unnamed USB devices,
	the USB device's programmed Vendor ID (VID) and
	Product ID (PID) display.
Location/Serial	The serial number of the USB device if it has one. If it does
Number	not have a serial number, the port (1-4) on the UBox to
	which the USB device is connected.
Cfg	Displays an asterisk if the device was configured using the
	USB Device Configuration window.
Status	Indicates whether the selected USB device is Attached,
	Detached, or has an Invalid Password (the password in
	this and the password saved on the Local Settings tab are
	different). (See 6: Changing Local Software Settings.)

3.To add or change information about a device, select the device and click the Add or Edit button (The Edit button is active if you have already added information.) The Device Configuration window opens.

UBox User Guide

37

Image 37

Contents Part Number Revision D June UBox USB Device Server User GuideCopyright Contacts TrademarkRevisions Lantronix Corporate HeadquartersContents Contents Changing the UBoxs SettingsTroubleshooting USB Devices Resetting the UBox HardwareTechnical Support CE Mark Declaration of ConformityDisconnect Printer for Auto Connect Purpose and Audience Using This GuideSummary of Chapters Remaining chapters in this guide includeModel and Part Numbers IntroductionUSB Speeds and Throughput Compatible USB Devices Supported DevicesConnectivity to USB Devices Connectivity to a NetworkRequirements Hub SupportWhats Inside the Package Windows Windows XP and Vista 32 bitInstalling the UBox Hardware Installing the UBoxConnect the UBox’s Power Supply and Read the LEDs Connect the UBox to Your NetworkUDS4100 System LEDs Installing the UBoxTo install the UBox Software Installing the UBox SoftwareUSB Devices Tab Servers Tab Displaying a UBox Uninstalling the Lantronix UBox SoftwareConnecting Your USB Device Using USB Devices on the NetworkOverview Connect a USB Device to the UBoxReview the following information on the USB Devices tab Using USB Devices on the NetworkAction Device Name Connect a Networked USB DeviceStatus LocationDisconnect Your USB Devices Compound Devices Using Multiple UBoxes and USB DevicesOne UBox with Multiple Users Multiple UBoxes and USB DevicesUBox Groups on Multiple UDP Ports Other Ways to Connect and Disconnect USB DevicesPC Connectivity to UBoxes and UBS Devices SummaryUsing the UBox System Tray To use the auto connect feature Auto Connecting PrintersDisconnect Printer for Auto Connect Auto Connect EnabledTo use Forced Device Disconnect Using Forced Device DisconnectOn the USB Devices tab, select the UBox to disconnect From the Advanced menu, select Force Device DisconnectForced Device Disconnect on the Advanced Menu Using Multi-and Single-User Connect ModesDevice Status Types of USB Devices Separating Compound DevicesSeparating Compound Devices To separate compound devicesViewing UBox Settings Changing the UBoxs SettingsStatus column, the following may display Changing the UBoxs SettingsServer # Server NameTo edit the UBox’s Settings on the Access Tab Editing Server Settings Access TabUpdate the following settings as desired Firmware UpgradeConnect Mode Editing Server Settings Network Tab Assignment IP AddressIP Address, Subnet Mask, and Gateway for the UBox Gateway Subnet MaskUDP Port TCP PortEditing Server Settings USB Device Configuration Tab Number Location/SerialCfg Following information displays at the top Reenter Password Share Mode Applying, Canceling, or Removing Server SettingsConnection To restore the UBox to factory settings Restoring Default SettingsTo update the firmware Updating the UBoxs FirmwareClick the Close button UBox User Guide Update Server FirmwareTo override network settings Overriding Server Network SettingsEnter the following information You can get more information about ZeroConf at Refreshing DataUpdating Personal Communication Settings Changing Local Software SettingsTo update your computer’s settings Client Name Changing Local Software SettingsMulticast Address Update the following information as needed Updating Server Access SettingsTo view or remove USB device passwords Viewing or Removing Device PasswordsDevice Serial # Switching Between Sets of UBoxes Troubleshooting Status Lights TroubleshootingBefore You Begin ‹ OffStatus Lights on UBox TroubleshootingSystem Status Light Boot-UpSystem Status Lights 2 On / System System 2 isOff / System Status 2 is OffTroubleshooting UDP Ports Communication Between your PC and the UBox Troubleshooting Network IssuesTo ping the UBox Is Not ListedPower-Cycling or Using the Reset Button Resetting the UBox HardwareFirewalls Final StepTo boot into safe mode Rebooting the UBox into Safe Mode Using the Reset ButtonTo troubleshoot problems with USB Devices Troubleshooting USB DevicesTo troubleshoot issues with multiple users of a USB device Technical SupportTroubleshooting Position of Status Lights on the UBox Status Light BehaviorIf System 1 green Status Light BehaviorSystem 2 red/amber blink Refer to -4. UBox Status Lights -- UBox is Running System 2 and System 3 bothSystem 2= on and System 3= OFF System 2= OFF and System 3= OFFSystem 2= on and System 3= on System 2=OFF and System 3= onTo determine Windows XP version Configuring the Windows XP FirewallTo obtain your UDP and TCP port numbers AConfiguring the Windows XP FirewallTo obtain your IP address Local Area Connection Properties Advanced Tab To obtain the Advanced Settings windowTo add your UDP Port to the firewall Advanced Settings WindowTo close the remaining windows To add your TCP port to the firewallSelect On Click the Exceptions tab UBox User Guide To access your firewall software11. Exceptions Tab 13. Add a Port Window TCP Select UDP Click OKCE Mark Declaration of Conformity Compliance UBoxCanada Digital Apparatus EMI Standard Manufacturers Name and AddressDisclaimer and Supplementary Information Australia/New ZealandBCompliance UBox TranslationSLB SLP SCS SLS DSC RoHS NoticeDeclaration of Conformity CCompliance UBox Manufacturer’s Contact Lantronix Software License Agreement DLantronix Software License Agreement Lantronix Warranty

Related manuals

Manual 95 pages 52.43 Kb