Lantronix 900-653-R manual Password Required, Modem Escape Sequence, Pass Through, Active Connect

			5: Configuration Using Web Manager
	Password Required	Determines whether a password is required for an incoming passive
		connection. This field is not available when a password is set for Telnet
		mode. The default setting is No.
	Password	If Password Required was set to Yes, enter the password for passive
		connections.
	Modem Escape Sequence	Disable or enable the xDirect’s ability to send the escape sequence. The
	Pass Through	default is Yes (send the escape sequence).
Connect Mode: Active Connection
	Active Connect		Select None (default) to disable Active Connect. Otherwise, indicate
			the connection type from the drop-down list:
			 With Any Character: Attempts to connect when any character is
			received from the serial port.
			 With Active Mdm Ctrl In: Accepts external connection requests only
			when the Modem Control In input is asserted.
			 With Start Character: Attempts to connect when it receives a specific
			start character from the serial port. The default start character is
			carriage return.
			 Manual Connection: Attempts to connect when directed by a
			command string received from the serial port.
			 Auto Start: Automatically connects to the remote IP address and port
			after booting up.
	Start Character		If Active Connect is set to With Start Character, enter the start character
			in this field. The default setting is 0D.
	Modem Mode		Indicates the on-screen response type when in Modem Mode (if Modem
			Mode is enabled). The default setting is None.
	Show IP Address After RING		Indicates whether to display the remote IP address upon connection. The
			default setting is Yes.
Endpoint Configuration
	Local Port		Enter the local port number.
	Auto increment for active		Select to auto-increment the local port number for new outgoing
	connect		connections. The range of auto-incremented port numbers is 50,000 to
			59,999 and loops back to the beginning when the maximum range is
			reached. Disabled by default.
	Remote Port		Enter the remote port number.
	Remote Host		Enter the IP address of the remote device.
Common Options
	Telnet Com Port Cntrl		This field is available for configuration only when Active Connect is set
			to None. Select Enable to permit Telnet communication to the xDirect
			unit. The Telnet Com Port Cntrl feature is used in conjunction with the
			Com Port Redirector (CPR) utility. (See the CPR online Help for details.)
	Terminal Name		This field is available for configuration only when Telnet Com Port Cntrl
			is set to Enable.
			Use the terminal name for the Telnet terminal type. Enter only one name.
			When this option is enabled, the unit also reacts to the end of record
			(EOR) and binary options, which can be used for applications such as
			terminal emulation to IBM hosts.

xDirect User Guide 32