GarrettCom Quad manual Agency Approvals

Page 8

Magnum Quad-Series Fiber Switches

Installation and User Guide (06/03)

Fiber Single-mode connector types:

Fiber Port, SC-type: Fiber optic single-mode, 100BASE-FX

Manual switch-selections and jumpers

Up-link Push-button: Crossover sw for one RJ-45 port per QPM-RJ45

Fiber default: Full-duplex (Internal jumpers may select HDX mode)

Copper default: Auto-negotiation (Internal jumpers may alternatively select fixed 100Mb full-duplex, or fixed 100Mbps half-duplex)

LEDs: Per Port

LK: Steady ON when media link is operational

ACT: ON with receiver port activity

FDX/HDX: ON = Full-Duplex Mode OFF = Half-Duplex Mode

100/10: ON = 100Mbps speed OFF = 10 Mbps

Operating Environment

Ambient Temperature: 32° to 120° F (0° to 50°C)

Storage Temperature: -40°to 185°F (-40°to 85°C)

Ambient Relative Humidity: 10% to 95% (non-condensing)

Packaging

Enclosure: Rugged High strength metal. Suitable for stand-alone or rack- mounting

Dimensions: 1.75 in H x 17.0 in W x 9.13 in D (10.0 in W for QS580)

	4.45cm H x 43.2cm W x 23.2cm D (25.4 cm W for QS580)
Weight:	4.0 lb. (1.8 Kg) for rack-mount models, 2.5 lb. for table-top

Cooling method: Fan cooled, @ 9 cfm

Power Supply (Internal)

AC Power Connector: IEC-type, male recessed at rear of chassis, with adjacent manual ON-OFF switch (on AC models only)

Input Voltage: 110 to 240 VAC (auto-ranging)

Input Frequency: 47 to 63 Hz (auto-ranging)

Power Consumption: 20 watts typical (8 port model) 35 watts typical (16 port model)

Redundant power supplies available as options

DC Power Supply (Options)

-48VDC Power Input Voltage : 36 to 70 VDC

24VDC Power Input Voltage : 20 to 36VDC

125VDC Power Input Voltage : 120 to 160VDC

Std. Terminal Block : “ -, GND, + ”

Power Consumption: same as for AC models, see above

For Dual Source and Redundant DC for –48VDC, 24VDC Power & 125VDC supply options (Optional), see Appendices

For optional 23” Telco rack-mount brackets, order Model # RMB-23W

Agency Approvals

UL listed (UL1950), cUL, CE

Emissions meet FCC Part 15 Class A

Warranty

Three years, return to factory

Made in USA

www . GarrettCom . com

2

Image 8

Contents Fiber Switches Trademarks GarrettCom, Inc Contacting GarrettCom, IncTable of Contents IntroductionIntroduction Magnum QUAD-SERIES QPM Personal Switches, 10/100Mb Personal Hubs, 10Mb seriesTechnical Specifications Agency Approvals Ordering Information Magnum Quad-Series Port ModulesInspecting the Package and Product Product Description Magnum Quad-Series Fiber Switches Magnum Quad-Series chassis modelsPorts Table-Top Fiber Quad-port modules, 100Mb fiberQuad-port modules, 10 Mb Quad-Port Module, RJ-45 copper Combo 3 + 1 Quad Port Modules, 3@RJ-45 and 1@fiberQPM-RJ45 QPRJ-MSCFrame Buffering and Latency Www . GarrettCom . com Features and Benefits „ Plug-and-Play installation for high performance switching„ Front-mounted LEDs, world-wide AC power supply „ 16-port, 12-port, 8-port and 4-port modelsApplications Example 1 Magnum QS580Example 2 Magnum 8-port QS5108 Example 3 Magnum 16-port QS5116 Locating Magnum Quad-Series Switches Location of 8-port Magnum QS580’s cooling fan exhaustConnecting Ethernet Media Connecting Fiber Optic ST-type, twist-lockIeee Standard Media Type Max. Distance Port Module Fiber CopperMedia Ieee Standard Connecting Fiber Optic SC-type, Snap-InConnecting Single-Mode Fiber Optic Rack-mounting, models QS5108 and QS5116 Table-Top or Shelf MountingWall or Vertical Surface Mounting, 8-port QS580 Multiple Magnum QS5116 units rack-mounted in a 23 frame Jumper Settings for HDX/FDX Fiber ports, internal jumper settings Combo ports, RJ-45 and Fiber internal jumper settings Www . GarrettCom . com Powering the Magnum Quad-Series Switch 10Mbps Fiber ports internal jumper settingsQuad Port Module QPM Installation Preparation for Installing and Removing QPMsRemove Chassis Cover 1a Removing Chassis CoverInstalling QPM Cards in the Magnum Q-Series 1c Front View QPM Retaining Screws hold Face Plates2a Inserting QPM Cards into a Magnum QS5116 Removing QPM Cards 3b Removing a QPM CardAddress Learning Switching FunctionalityFiltering and Forwarding Status LEDs Auto-negotiation, for Fast Ethernet copper portsPWR ACTWww . GarrettCom . com Auto-negotiation for 10 Mb ports, half- or full-duplex mode Flow-control, Ieee 802.3x standardFiber Port Module Introduction Magnum QUAD-SERIES QUAD-PORT Modules QPM Product DescriptionQPM-MST, 100Mb multi-mode FX-ST Quad-port Module, twist lock QPM-SSC 100Mbps single-mode FX-SC-type, snap-in connector 100BASE-FX Single-ModeSmall-form-factor QPM-RJ45 Twisted Pair, 10/100Mb TP Quad-Port 10/100BASE-T and 100BASE-FX Combo Quad-Port Connectors QPM-FP 10 Blank Face PlateBefore Calling for Assistance No Problem Found When Calling for AssistanceReturn Material Authorization RMA Procedure Shipping and Packaging Information B1.0 Specifications for Magnum QUAD-SERIES SwitchesPower Supply Internal -48 VDC Option B3.0 Applications for DC Powered Ethernet Switches Power Supply Internal 24 VDC OptionPower Supply Internal 125 or 100VDC Option B5.0 Operation B4.0 InstallationB4.1 UL Requirements B6.0 Ordering Information Magnum QS5116-125VDCC4.0 Features and Benefits of the DUAL-SOURCE Design C5.0 InstallationC3.0 DUAL-SOURCE OPTION, Theory of Operation To the external Terminal BlockC5.1 UL Requirements C6.0 Ordering InformationExample Magnum QS5116-48VDC C7.0 Operation