GarrettCom manual 10/100BASE-T and 100BASE-FX Combo Quad-Port Connectors

Page 46

Magnum Quad-Series Fiber Switches

Installation and User Guide (06/03)

FDX/HDX LED to indicate full-duplex mode when lit (or half-duplex when off), and a “speed” LED indicating 100Mb when lit (or 10 Mbps when off).

Important Note: For the QPM-RJ45 Crossover Push-button - OUT for workstations and user node connections.

IN for Up-Link connections to other hubs, switches, etc.

The RJ-45 pins normally (TP crossover push-button DOWN) are per the standard for hubs-to-users twisted pair wiring: 1 = receive+, 2 = receive-, 3 = transmit+, 6 = transmit-, other pins not used. When the TP crossover push-button is UP, the pins of the RJ-45 port are per the standard for up-links using twisted pair wiring, i.e., the transmit and the receive pairs are exchanged: 1 = transmit+, 2 = transmit-, 3 = receive+, 6 = receive-, other pins not used.

5.2.7QPRJ-MSC, “3 + 1” 3@10/100Mb RJ-45 and 1@100Mb Fiber SC Multi-mode Connector, “Combo” Quad-Port Module

The QPRJ-MSC “3+1 Combo” quad-port supports three auto- negotiating twisted pair ports at 10/100Mbps FDX / HDX, and one fiber port with 100Mbps multi-mode FX SC connector. The three RJ-45 ports on the right operate the same as those in the same place on the QPM-RJ45 module.

10/100BASE-T and 100BASE-FX Combo Quad-Port Connectors

 

 

 

 

2

 

 

 

 

LK

1

2

3

4

ACT

1

5

HDX/FDX

 

 

 

 

 

 

 

 

 

100/10

 

FDX/HDX

 

 

 

 

 

 

4

 

3

 

1

ACTIVITY

2

 

 

LINK

 

 

 

 

3 FULL/HALF

4 SPEED

DUPLEX (RJ-45)

 

5FULL/HALF DUPLEX(FIBER)

The fiber SC connector

functions as a fiber optic transceiver to support 100BASE-FX network segments. When installed in a Quad-Series Fiber Switch, it supports fiber cable distances up the IEEE- standard 100Mbps distance limits, i.e., typically 2km at full-duplex and 412m at half- duplex. The factory default setting is for full-duplex operation, and a jumper on the module must be moved to select half-duplex. (See Section 3.4).

Each 3+1 combo port has an Activity (ACT) LED indicating packets being received, a Link (LK) LED that indicates proper connectivity with the remote device when lit, a FDX/HDX LED to indicate full-duplex mode when lit (or half-duplex when off). In addition, the RJ-45 ports have a “speed” LED indicating 100Mb when lit (or 10 Mbps when off). The fiber port is always 100Mbps speed.

www . GarrettCom . com

40

Image 46
Contents Fiber Switches Trademarks GarrettCom, Inc Contacting GarrettCom, IncTable of Contents IntroductionIntroduction Magnum QUAD-SERIES QPM Personal Switches, 10/100Mb Personal Hubs, 10Mb seriesTechnical Specifications Agency Approvals Ordering Information Magnum Quad-Series Port ModulesInspecting the Package and Product Product Description Magnum Quad-Series Fiber Switches Magnum Quad-Series chassis modelsPorts Table-Top Quad-port modules, 10 Mb Quad-port modules, 100Mb fiberFiber QPM-RJ45 Quad-Port Module, RJ-45 copperCombo 3 + 1 Quad Port Modules, 3@RJ-45 and 1@fiber QPRJ-MSCFrame Buffering and Latency Www . GarrettCom . com „ Front-mounted LEDs, world-wide AC power supply Features and Benefits„ Plug-and-Play installation for high performance switching „ 16-port, 12-port, 8-port and 4-port modelsApplications Example 1 Magnum QS580Example 2 Magnum 8-port QS5108 Example 3 Magnum 16-port QS5116 Locating Magnum Quad-Series Switches Location of 8-port Magnum QS580’s cooling fan exhaustIeee Standard Media Type Max. Distance Port Module Fiber Connecting Ethernet MediaConnecting Fiber Optic ST-type, twist-lock CopperConnecting Single-Mode Fiber Optic Connecting Fiber Optic SC-type, Snap-InMedia Ieee Standard Wall or Vertical Surface Mounting, 8-port QS580 Table-Top or Shelf MountingRack-mounting, models QS5108 and QS5116 Multiple Magnum QS5116 units rack-mounted in a 23 frame Jumper Settings for HDX/FDX Fiber ports, internal jumper settings Combo ports, RJ-45 and Fiber internal jumper settings Www . GarrettCom . com Powering the Magnum Quad-Series Switch 10Mbps Fiber ports internal jumper settingsQuad Port Module QPM Installation Preparation for Installing and Removing QPMsRemove Chassis Cover 1a Removing Chassis CoverInstalling QPM Cards in the Magnum Q-Series 1c Front View QPM Retaining Screws hold Face Plates2a Inserting QPM Cards into a Magnum QS5116 Removing QPM Cards 3b Removing a QPM CardFiltering and Forwarding Switching FunctionalityAddress Learning PWR Status LEDsAuto-negotiation, for Fast Ethernet copper ports ACTWww . GarrettCom . com Auto-negotiation for 10 Mb ports, half- or full-duplex mode Flow-control, Ieee 802.3x standardFiber Port Module Introduction Magnum QUAD-SERIES QUAD-PORT Modules QPM Product DescriptionQPM-MST, 100Mb multi-mode FX-ST Quad-port Module, twist lock QPM-SSC 100Mbps single-mode FX-SC-type, snap-in connector 100BASE-FX Single-ModeSmall-form-factor QPM-RJ45 Twisted Pair, 10/100Mb TP Quad-Port 10/100BASE-T and 100BASE-FX Combo Quad-Port Connectors QPM-FP 10 Blank Face PlateBefore Calling for Assistance Return Material Authorization RMA Procedure When Calling for AssistanceNo Problem Found Power Supply Internal -48 VDC Option B1.0 Specifications for Magnum QUAD-SERIES SwitchesShipping and Packaging Information Power Supply Internal 125 or 100VDC Option Power Supply Internal 24 VDC OptionB3.0 Applications for DC Powered Ethernet Switches B4.1 UL Requirements B4.0 InstallationB5.0 Operation B6.0 Ordering Information Magnum QS5116-125VDCC3.0 DUAL-SOURCE OPTION, Theory of Operation C4.0 Features and Benefits of the DUAL-SOURCE DesignC5.0 Installation To the external Terminal BlockExample Magnum QS5116-48VDC C5.1 UL RequirementsC6.0 Ordering Information C7.0 Operation