Freescale Semiconductor M9328MX21ADSE ADS Specifications, Characteristic Specifications

General Information

•P8 — 5.0-volt input power connector

•P9 — RJ-45 Ethernet connectors

•P10 — Line In to audio CODEC

•P11 — Microphone In to audio CODEC

•P12 — Headphone Out to audio CODEC

•P13 — TV Encoder connector

•PE1 — Connector to an Image Sensor card

•PE2, PE3 — I/O Extension connectors

•S1 — Peripheral enable and JTAG select DIP switches

•S2 — Boot mode, clock mode, and user defined DIP switches

•SW1 — Power switch

•SW2 — Reset switch

•LED1 — 5 volt power LED (green)

•LED2 — 3 volt power LED (green)

•LED3 and LED4 — General-purpose LEDs (orange)

•LED5, LED6 — Ethernet activity LEDs (green, orange)

•LED7 — external bus activity LED (red)

•U16 — IrDA transceiver

•VR1 — emulate the battery voltage level

•J3, J4, J5 and J6 — Modem control enable jumpers for RS-232 DTE interface on P2

•J7 — One wire interface

1.5ADS Specifications

Table 1-1shows M9328MX21ADSE specifications.

	Table 1-1. Specifications
Characteristic		Specifications
Clock speed (SDRAM/FLASH)		CPU 266MHz, System 133MHz
Ports		10Base-T (RJ-45), RS-232 serial, USB OTG
Temperature:
operating		0° to +50° C
storage		-40° to +85° C
Relative humidity		0 to 90% (noncondensing)
Power requirements		4.5V — 5.5 VDC @ 2.4 A
Dimensions		7.15 x 9.45 in (18.2 x 24.1 cm)

	M9328MX21ADSE User’s Manual, Rev. A
1-4	Freescale Semiconductor