Fortinet Version 3.0 manual System route, Distanceinteger

system route config CLI commands

system route

Use this command to add or edit FortiBridge static routes.

Command syntax pattern

config system route

edit <sequence_integer>

set <keyword> <variable>

end

config router static unset <keyword>

get system route

show system route

Keywords and variables	Description	Default
distance	The administrative distance for the route. Using administrative	10
<distance_integer>	distance you can specify the relative priorities of different routes to the
	same destination. A lower administrative distance indicates a more
	preferred route. Distance can be an integer from 1-255.
dst <destination-	The destination IP address and netmask for this route.	0.0.0.0
address_ipv4mask>	Enter 0.0.0.0 0.0.0.0 for the destination IP address and netmask	0.0.0.0
	to add a default route.
gateway <gateway-	The IP address of the first next hop router to which this route directs	No
address_ipv4>	traffic.	default.

Example

This example shows how to edit a FortiBridge static route.

config system route edit 2

set dst 192.168.22.0 255.255.255.0 set gateway 192.168.22.44

end

This example shows how to display the list of static route numbers.

get system route

This example shows how to display the settings for static route 2.

get system route 2

This example shows how to display the static route configuration.

show system route

This example shows how to display the configuration for static route 2.

show system route 2

70	FortiBridge Version 3.0 Administration Guide
	09-30000-0163-20061109