Eizo CG245W user manual Expanding Signal Output Range Range Extension, Displaying Screen Correctly

Page 16

2-2. Expanding Signal Output Range [Range Extension]

The signal range can be expanded to meet the input signal from 64/1023 - 1019/1023 to 0/1023 -1023/1023.

Procedure

1.Choose <Screen> from the Adjustment menu, and press .

2.Choose <Range Extension> from the <Screen> menu, and press .

3.Select “On” with or .

4.Press to exit the adjustment.

Attention

• Settings cannot be performed when CAL mode is being displayed.

2-3. Displaying Screen Correctly

Digital Input

When digital signals are input, images are displayed correctly based on the preset data of the monitor. When performing advanced adjustment, see “2-4. Color Adjustment” (page 20) and subsequent pages.

Analog Input

Attention

•Wait 30 minutes or more from monitor power on before starting adjustments. (Allow the monitor to warm up for at least 30 minutes before making adjustments.)

•Depending on the condition of the displayed screen, the auto adjustment function may not operate.

The monitor screen adjustment is used to suppress flickering of the screen or adjust screen position and screen size correctly according to the PC to be used.

The Self Adjust function works when all of the following conditions are satisfied.

•When a signal is input into the monitor for the first time or when the resolution or Vertical/ Horizontal Frequency not displayed before is set

•When signals with the vertical resolution over 480 are input

If the screen is not displayed correctly even after performing the auto adjustment, perform the screen adjustments according to the procedures on the following pages to use the monitor comfortably.

[Adjustment Procedure]

1

●

Perform the auto adjustment.

To adjust flickering, screen position, and screen size automatically [Auto Adjustment]

Procedure

1.Choose <Screen> from the Adjustment menu, and press .

2.Choose <Analog Adjustment> from the <Screen> menu, and press .

3.Choose <Auto Adjustment>, and press .

The auto adjustment function works (the message “In Progress” appears) to correctly adjust the flickering, screen position, and screen size correctly.

When the auto adjustment is completed, a message appears. Select “OK” to confirm the new settings or “Cancel” to restore the previous settings, and press .

16 Chapter 2 Adjusting Screen

Image 16

Contents Page Location of Caution Statement Page LCD Panel CabinetContents HinweiseHinweise zur Auswahl des richtigen Features IntroductionControls and Functions Utility Disk Disk contents and software overviewTo use ColorNavigator Basic Operation and Functions Adjusting/SettingDisplaying Menu Showing Button Guide ExitingFunctions Calibration Adjusting Screen Setting Screen ResolutionWindows Windows VistaWindows XP Mac OSAdjustment Procedure Perform the auto adjustment Expanding Signal Output Range Range ExtensionDisplaying Screen Correctly Windows Page Adjust the color gradation To adjust color gradation automatically Range AdjustmentTo select the display mode Color Mode Color AdjustmentMode Purpose Adjustment items in each mode To perform advanced adjustmentsColor Mode Icon Function To adjust the contrast Contrast To adjust the brightness BrightnessTo adjust the color temperature Temperature To adjust the hue Hue To adjust the gamma value GammaTo adjust the color saturation Saturation To adjust the black level Black Level To adjust the gain value GainTo enhance the outline of the image Outline Enhancer To adjust six colors 6 Colors Displaying Lower Resolutions Configuring moving image performance OverdriveTo change screen size Screen Size Menu FunctionSettings Buttons that can be locked Enabling/Disabling Mode Selection Mode PresetLocking Buttons Key Lock Setting the Eizo Logo Display Logo Setting Orientation OrientationSetting Range of Frequency Signal Bandwidth Setting Language LanguageSelectable languages Sets the brightness of the front buttons Indicator Restoring the Default Setting To reset color adjustment values Color ResetExecuting SelfCalibration Calibration Checking Calibration Results ResultSetting Calibration Details Setting Setting the mode to execute SelfCalibration Mode SelectionSetting the calibration targets Setting Item Setting RangeSetting the monitor date and time Clock Adjustment Set the monitor date and timeSetting the calibration schedule Schedule FRI/SAT/SUNSignal inputs Standard Setting the Power Saving Power SaveMonitor Power Indicator Troubleshooting Problems Possible cause and remedy No pictureProblems Possible cause and remedy Characters are blurred Afterimages appearRemain on the screen Shown belowProblems Possible cause and remedy Cable is not detected. / USB devicesConnected to the monitor does not work Stays outAttaching an Arm Attach the monitor to the arm or standTo switch the input signal Connecting More than Two PCs to the MonitorConnection examples To set input signal selection Input Selection Setting FunctionMaking Use of USB Universal Serial Bus Connection Procedure Setup of USB FunctionRequired System Environment Displaying Monitor Information Displaying signal information Signal InfoDisplaying monitor information Monitor Info Specifications Main default settings factory settings USBOutside Dimensions Unit mm inchConnector Pin Assignment Pin SignalPin No Signal Contact No Signal RemarksGlossary Hdcp High-bandwidth Digital Contents Protection PhaseRange Adjustment ResolutionTemperature Tmds Transition Minimized Differential SignalingPreset Timing VGA TextFor more information, please visit FCC Declaration of Conformity Hinweis zur Ergonomie Limited Warranty Begrenzte Garantie Garantie Limitée Garantía Limitada Garanzia Limitata Begränsad Garanti Περιορισμενη Εγγυηση Ограниченная Гарантия 有限责任保证书关于电子信息产品污染控制标识