Eizo CG245W user manual Controls and Functions

Page 8

NOTE

•This monitor supports the Portrait/Landscape display. This function allows you to change the orientation of the Adjustment menu when using the monitor screen in vertical display position. (Refer to “3-4. Setting Orientation [Orientation]” (page 28).)

•For using the monitor with “Portrait” position, the graphics board supporting portrait display is required. When using the monitor with “Portrait” position, the setting needs to be changed depending on the graphics board used in your PC. Refer to the manual of the graphics board for details.

1-2. Controls and Functions

Adjustment menu

		14
	16	17
	15	17
	15

1	2	3	4	5	6	7	8	9 10
								9 10

11

12

13

	1	Ambient Light Sensor	Measures ambient light.
	2	button	Switches input signals for display images.
	3	button	Allows you to switch the Color Mode.
	4	button	Displays the SelfCalibration menu.
	5	button	Cancels the adjustment/setting or exit the adjustment menu.
	6	buttons	Chooses an adjustment item or increases/decreases adjusted values for
			advanced adjustments using the Adjustment menu.
	7	button	Displays the Adjustment menu, determines an item on the menu screen,
			and saves values adjusted.
	8	button	Turns the power on or off.
			Indicates monitor’s operation status.
			Blue	: Operating
			Flashing blue	: In the following cases, this notifies that recalibration
			(2 times for each)		is required.
				•	When the timer is set in ColorNavigator (CAL mode)
				•	When the SelfCalibration schedule is set
			Orange	: Power saving
			Off	: Power off
	9	Main Power switch	Turns the main power on or off.
	10	Power connector	Connects the power cord.
	11	Input signal connectors	Display Port Connector x 1
	12	Input signal connectors	DVI-I Connector x 2
	13	USB port (Up)	Connects the USB cable to use the software that needs USB
			connection, or to use USB Hub function.
	14	USB port (Down)	Connects a peripheral USB dirive.
	15	Stand	Used to adjust the height and angle of the monitor screen.
	16	Security lock slot	Complies with Kensington's MicroSaver security system.
	17	Cable holder	Covers the monitor cables.
8	Chapter 1	Introduction

Image 8

Contents Page Location of Caution Statement Page LCD Panel CabinetContents HinweiseHinweise zur Auswahl des richtigen Features IntroductionControls and Functions To use ColorNavigator Disk contents and software overviewUtility Disk Displaying Menu Adjusting/SettingBasic Operation and Functions Showing Button Guide ExitingFunctions Calibration Adjusting Screen Setting Screen ResolutionWindows Windows VistaWindows XP Mac OSDisplaying Screen Correctly Expanding Signal Output Range Range ExtensionAdjustment Procedure Perform the auto adjustment Windows Page Adjust the color gradation To adjust color gradation automatically Range AdjustmentMode Purpose Color AdjustmentTo select the display mode Color Mode Color Mode Icon Function To perform advanced adjustmentsAdjustment items in each mode To adjust the color temperature Temperature To adjust the brightness BrightnessTo adjust the contrast Contrast To adjust the color saturation Saturation To adjust the gamma value GammaTo adjust the hue Hue To enhance the outline of the image Outline Enhancer To adjust the gain value GainTo adjust the black level Black Level To adjust six colors 6 Colors Displaying Lower Resolutions Configuring moving image performance OverdriveTo change screen size Screen Size Menu FunctionLocking Buttons Key Lock Enabling/Disabling Mode Selection Mode PresetSettings Buttons that can be locked Setting the Eizo Logo Display Logo Setting Orientation OrientationSelectable languages Setting Language LanguageSetting Range of Frequency Signal Bandwidth Sets the brightness of the front buttons Indicator Restoring the Default Setting To reset color adjustment values Color ResetExecuting SelfCalibration Calibration Checking Calibration Results ResultSetting Calibration Details Setting Setting the mode to execute SelfCalibration Mode SelectionSetting the calibration targets Setting Item Setting RangeSetting the monitor date and time Clock Adjustment Set the monitor date and timeSetting the calibration schedule Schedule FRI/SAT/SUNMonitor Power Indicator Setting the Power Saving Power SaveSignal inputs Standard Troubleshooting Problems Possible cause and remedy No pictureProblems Possible cause and remedy Characters are blurred Afterimages appearRemain on the screen Shown belowProblems Possible cause and remedy Cable is not detected. / USB devicesConnected to the monitor does not work Stays outAttaching an Arm Attach the monitor to the arm or standConnection examples Connecting More than Two PCs to the MonitorTo switch the input signal To set input signal selection Input Selection Setting FunctionRequired System Environment Connection Procedure Setup of USB FunctionMaking Use of USB Universal Serial Bus Displaying monitor information Monitor Info Displaying signal information Signal InfoDisplaying Monitor Information Specifications Main default settings factory settings USBOutside Dimensions Unit mm inchConnector Pin Assignment Pin SignalPin No Signal Contact No Signal RemarksGlossary Hdcp High-bandwidth Digital Contents Protection PhaseRange Adjustment ResolutionTemperature Tmds Transition Minimized Differential SignalingPreset Timing VGA TextFor more information, please visit FCC Declaration of Conformity Hinweis zur Ergonomie Limited Warranty Begrenzte Garantie Garantie Limitée Garantía Limitada Garanzia Limitata Begränsad Garanti Περιορισμενη Εγγυηση Ограниченная Гарантия 有限责任保证书关于电子信息产品污染控制标识