Eizo CG245W user manual Executing SelfCalibration Calibration, Checking Calibration Results Result

Page 32

Chapter 4 SelfCalibration

This product is equipped with an built-in calibration sensor. This function allows you to set the calibration targets or schedule in advance, and automatically execute regular calibration. Calibration can be executed independently by the monitor.

Attention

•To execute SelfCalibration, it is necessary to set the calibration targets etc.

•For more information, refer to “4-3. Setting Calibration Details [Setting]” (page 33).

NOTE

•Use SelfCalibration as support for monitor calibration with ColorNavigator.

•When matching the measurement results of the built-in sensor with the measurement results from a measurement device, use the Correlation Utility included with ColorNavigator. Refer to the ColorNavigator User's Manual on the CD-ROM.

•SelfCalibration can also be executed when there are no computer signals being input.

4-1. Executing SelfCalibration [Calibration]

Procedure

1.Press .

The SelfCalibration menu appears.

2.Choose <Calibration> from the SelfCalibration menu, and press .

3.Select “Execute” with or .

4.Press .

The built-in sensor is activated, and SelfCalibration is executed.

Attention

•To execute SelfCalibration, it is necessary to select CAL mode.

•After selecting execute, aging may be executed before the built-in sensor is activated.

4-2. Checking Calibration Results [Result]

The previous calibration results can be checked.

Procedure

1.Choose <Result> from the SelfCalibration menu, and press .

2.Select the mode you want to check the results for with or . The Result menu appears.

The date and time the last SelfCalibration was executed, and the total monitor usage time from the previous calibration are displayed.

3.Select “Calibration Result” or “Ambient Light” with or . The previous calibration results are displayed.

Attention

•The measurement results of the ambient light sensor are used to check the difference between the current environmental light level and the level of ambient light when calibration was executed, and are not reflected in the calibration results.

NOTE

•If <Ambient Light> is selected, the current environmental light is also displayed.

•Numerical values that do not reach the target values are displayed in yellow.

•If the environment in which the product is used is significantly different to the previous environment, the ambient light measurement results may differ greatly between the previous calibrations and current calibrations.

32 Chapter 4 SelfCalibration

Page 31 Page 33
Image 32
Page 31 Page 33
Contents Page Location of Caution Statement Page LCD Panel CabinetContents HinweiseHinweise zur Auswahl des richtigen Features IntroductionControls and Functions To use ColorNavigator Disk contents and software overviewUtility Disk Displaying Menu Adjusting/SettingBasic Operation and Functions Showing Button Guide ExitingFunctions Calibration Adjusting Screen Setting Screen ResolutionWindows Windows VistaWindows XP Mac OSDisplaying Screen Correctly Expanding Signal Output Range Range ExtensionAdjustment Procedure Perform the auto adjustment Windows Page Adjust the color gradation To adjust color gradation automatically Range AdjustmentMode Purpose Color AdjustmentTo select the display mode Color Mode Color Mode Icon Function To perform advanced adjustmentsAdjustment items in each mode To adjust the color temperature Temperature To adjust the brightness BrightnessTo adjust the contrast Contrast To adjust the color saturation Saturation To adjust the gamma value GammaTo adjust the hue Hue To enhance the outline of the image Outline Enhancer To adjust the gain value GainTo adjust the black level Black Level To adjust six colors 6 Colors Displaying Lower Resolutions Configuring moving image performance OverdriveTo change screen size Screen Size Menu FunctionLocking Buttons Key Lock Enabling/Disabling Mode Selection Mode PresetSettings Buttons that can be locked Setting the Eizo Logo Display Logo Setting Orientation OrientationSelectable languages Setting Language LanguageSetting Range of Frequency Signal Bandwidth Sets the brightness of the front buttons Indicator Restoring the Default Setting To reset color adjustment values Color ResetExecuting SelfCalibration Calibration Checking Calibration Results ResultSetting Calibration Details Setting Setting the mode to execute SelfCalibration Mode SelectionSetting the calibration targets Setting Item Setting RangeSetting the monitor date and time Clock Adjustment Set the monitor date and timeSetting the calibration schedule Schedule FRI/SAT/SUNMonitor Power Indicator Setting the Power Saving Power SaveSignal inputs Standard Troubleshooting Problems Possible cause and remedy No pictureProblems Possible cause and remedy Characters are blurred Afterimages appearRemain on the screen Shown belowProblems Possible cause and remedy Cable is not detected. / USB devicesConnected to the monitor does not work Stays outAttaching an Arm Attach the monitor to the arm or standConnection examples Connecting More than Two PCs to the MonitorTo switch the input signal To set input signal selection Input Selection Setting FunctionRequired System Environment Connection Procedure Setup of USB FunctionMaking Use of USB Universal Serial Bus Displaying monitor information Monitor Info Displaying signal information Signal InfoDisplaying Monitor Information Specifications Main default settings factory settings USBOutside Dimensions Unit mm inchConnector Pin Assignment Pin SignalPin No Signal Contact No Signal RemarksGlossary Hdcp High-bandwidth Digital Contents Protection PhaseRange Adjustment ResolutionTemperature Tmds Transition Minimized Differential SignalingPreset Timing VGA TextFor more information, please visit FCC Declaration of Conformity Hinweis zur Ergonomie Limited Warranty Begrenzte Garantie Garantie Limitée Garantía Limitada Garanzia Limitata Begränsad Garanti Περιορισμενη Εγγυηση Ограниченная Гарантия 有限责任保证书 关于电子信息产品污染控制标识
Top Page Image Contents