Eizo CG245W user manual Color Adjustment, To select the display mode Color Mode, Mode Purpose

2-4. Color Adjustment

●To select the display mode (Color Mode)

Color Mode allows you to select easily the adequate mode suitable for the monitor’s application.

Color Mode

Mode	Purpose
1-Custom	Available for the color settings according to your preference.
2-Adobe®RGB	Suitable for color matching with Adobe®RGB compatible peripherals.
3-sRGB	Suitable for color matching with sRGB compatible peripherals.
4-EBU	Suitable for reproducing the color gamut and gamma as set forth by EBU (European
	Broadcasting Union) standards.
5-REC709	Suitable for reproducing the color gamut and gamma as set forth by the ITU-R Rec. 709
	standard.
6-SMPTE-C	Suitable for reproducing the color gamut and gamma as set forth by SMPTE-C stan-
	dards.
7-DCI	Suitable for reproducing the color gamut and gamma as set forth by DCI standards.
8-CAL1	Displays the screen adjusted by calibration software.
9-CAL2
10-CAL3

Attention

•“CAL” mode can be adjusted by using the calibration software “ColorNavigator” and SelfCalibration (page 32).

•With default settings only one CAL mode can be selected for every input signal displayed.

•A CAL mode will be chosen by the ColorNavigator in accordance with the displayed input signal.

•Avoid operating any funciton of the monitor while using ColorNavigator.

The mode menu

appears.

Procedure

1.Press .

Mode menu appears at the lower left of the screen.

2.The mode among the list is highlighted in turn each time is pressed.

You can switch the current mode with or while the mode menu is being displayed.

Custom←→Adobe® RGB←→sRGB←→EBU←→REC709

CAL3←→CAL2←→CAL1←→DCI←→SMPTE-C

NOTE

•The Adjustment menu and the Mode menu cannot be displayed at the same time.

•You can disable a specific mode to be selected. For more information, refer to “3-1. Enabling/Disabling Mode Selection [Mode Preset]” (page 27).

20 Chapter 2 Adjusting Screen