Eizo CG245W Displaying Lower Resolutions, Configuring moving image performance Overdrive

Page 26

2-5. Displaying Lower Resolutions

●To change screen size [Screen Size]

The image with the resolution other than the recommended resolution is displayed in full screen automatically. You can change the screen size by using <Screen Size> from <Screen> menu.

Menu	Function
Full	Displays an image in full screen. Images are distorted in some cases because the
(default setting)	vertical rate is not equal to the horizontal rate.
Enlarged	Displays an image in full screen. In some cases, a blank horizontal or vertical border
	appears to equalize the vertical rate and the horizontal rate.
Normal	Displays images with the specified resolution.

Example: Image size 1280 x 1024

Full

(Default setting)

(1920 x 1200)

Enlarged

(1500 x 1200)

Normal

(1280 x 1024)

Procedure

1.Choose <Screen> from the Adjustment menu, and press .

2.Choose <Screen Size> from the <Screen> menu, and press .

3.Select “Full Screen,” “Enlarged,” or “Normal” with or .

4.Press to exit the adjustment.

2-6. Configuring moving image performance [Overdrive]

By using the <Overdrive> setting, the extent to which fast moving images produce visible afterimages can be reduced. This setting is set to “On” by default, but while turned “On” noise and afterimages may instead be more noticeable. In such a case, please set the <Overdrive> setting to “Off”.

Procedure

1.Choose <Tools> from the Adjustment menu, and press .

2.Choose <Overdrive> from the <Tools> menu, and press .

3.Select “On” or “Off” with or .

4.Press to exit the adjustment.

26 Chapter 2 Adjusting Screen

Image 26

Contents Page Location of Caution Statement Page LCD Panel CabinetContents HinweiseHinweise zur Auswahl des richtigen Features IntroductionControls and Functions To use ColorNavigator Disk contents and software overviewUtility Disk Displaying Menu Adjusting/SettingBasic Operation and Functions Showing Button Guide ExitingFunctions Calibration Adjusting Screen Setting Screen ResolutionWindows XP WindowsWindows Vista Mac OSDisplaying Screen Correctly Expanding Signal Output Range Range ExtensionAdjustment Procedure Perform the auto adjustment Windows Page Adjust the color gradation To adjust color gradation automatically Range AdjustmentMode Purpose Color AdjustmentTo select the display mode Color Mode Color Mode Icon Function To perform advanced adjustmentsAdjustment items in each mode To adjust the color temperature Temperature To adjust the brightness BrightnessTo adjust the contrast Contrast To adjust the color saturation Saturation To adjust the gamma value Gamma To adjust the hue Hue To enhance the outline of the image Outline Enhancer To adjust the gain value GainTo adjust the black level Black Level To adjust six colors 6 Colors To change screen size Screen Size Displaying Lower ResolutionsConfiguring moving image performance Overdrive Menu FunctionLocking Buttons Key Lock Enabling/Disabling Mode Selection Mode PresetSettings Buttons that can be locked Setting the Eizo Logo Display Logo Setting Orientation OrientationSelectable languages Setting Language LanguageSetting Range of Frequency Signal Bandwidth Sets the brightness of the front buttons Indicator Restoring the Default Setting To reset color adjustment values Color ResetExecuting SelfCalibration Calibration Checking Calibration Results ResultSetting the calibration targets Setting Calibration Details SettingSetting the mode to execute SelfCalibration Mode Selection Setting Item Setting RangeSetting the monitor date and time Clock Adjustment Set the monitor date and timeSetting the calibration schedule Schedule FRI/SAT/SUNMonitor Power Indicator Setting the Power Saving Power SaveSignal inputs Standard Troubleshooting Problems Possible cause and remedy No pictureRemain on the screen Problems Possible cause and remedy Characters are blurredAfterimages appear Shown belowConnected to the monitor does not work Problems Possible cause and remedyCable is not detected. / USB devices Stays outAttaching an Arm Attach the monitor to the arm or standConnection examples Connecting More than Two PCs to the MonitorTo switch the input signal To set input signal selection Input Selection Setting FunctionRequired System Environment Connection Procedure Setup of USB FunctionMaking Use of USB Universal Serial Bus Displaying monitor information Monitor Info Displaying signal information Signal InfoDisplaying Monitor Information Specifications Main default settings factory settings USBOutside Dimensions Unit mm inchPin No Signal Connector Pin AssignmentPin Signal Contact No Signal RemarksGlossary Range Adjustment Hdcp High-bandwidth Digital Contents ProtectionPhase ResolutionTemperature Tmds Transition Minimized Differential SignalingPreset Timing VGA TextFor more information, please visit FCC Declaration of Conformity Hinweis zur Ergonomie Limited Warranty Begrenzte Garantie Garantie Limitée Garantía Limitada Garanzia Limitata Begränsad Garanti Περιορισμενη Εγγυηση Ограниченная Гарантия 有限责任保证书关于电子信息产品污染控制标识