Eizo CG245W user manual Introduction, Features

Page 7

Chapter 1 Introduction

Thank you very much for choosing an EIZO Color Monitor.

1-1. Features

•24” wide format LCD

•Wide color gamut of 98% of Adobe RGB

•Applicable to the resolution of 1920 dots x 1200 lines

•HDCP (High-bandwidth Digital Content Interface)

•Frame Synchronous mode supported (23.75 - 30.5Hz, 47.5 - 61Hz)

•Applicable to DisplayPort (applicable to 8 bit or 10 bit, not applicable to audio signals)

•3 signal input terminals (DVI-I x 2, DisplayPort x 1)

•Color Mode function reproduces color gamut and gamma compliant with Adobe®RGB, [EBU/ REC709/SMPTE-C] broadcasting standards, as well as [DCI] digital cinema standards.

“2-4. Color Adjustment” (page 20)

•Attaching the “Adjustment Certificate” to describe the grayscale and uniformity characteristics of the monitor individually

•Portrait/Landscape display available (rotate 90 degrees clockwise

•Monitor hood attached

•The front buttons light to improve operability in dark places.

“3-8. Sets the brightness of the front buttons [Indicator]” (page 30)

•This product is equipped with a built-in color measurement sensor, and supports SelfCalibration in which the monitor executes calibration independently.

“Chapter 4 SelfCalibration” (page 32)

•The provided “ColorNavigator” calibration software enables you to calibrate monitor characteristics and generate color profiles

“1-3. Utility Disk” (page 9)

•Color Vision Deficiency Simulation Software “UniColor Pro” supported

This software can be downloaded from http://www.eizo.com

• Power saving function

This product is equipped with power saving function.

-- Power Consumption when main power switch is Off: 0W

Equipped with main power switch.

Turning off the main power switch completely shuts off power supply to the monitor while the monitor is not used.

CAUTION

Be careful of the following points when using the monitor hood.

•Do not carry the monitor with the hood attached.

While carrying the monitor, the hood may fall or slip off, which may result in injury or equipment damage.

•Do not place any objects on the hood.

If the hood falls or slips off or the monitor falls over, it may result in injury or equipment damage.

Attention

•Storing or using the monitor at a temperature of under 30°C and a humidity of under 70% is recommended, or it may affect the measurement accuracy of the built-in sensor. Avoid storing or using the sensor where it may be exposed to direct sunlight.

Chapter 1 Introduction

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Page Location of Caution Statement Page Cabinet LCD PanelContents HinweiseHinweise zur Auswahl des richtigen Introduction FeaturesControls and Functions Utility Disk Disk contents and software overviewTo use ColorNavigator Basic Operation and Functions Adjusting/SettingDisplaying Menu Exiting Showing Button GuideFunctions Calibration Setting Screen Resolution Adjusting ScreenMac OS WindowsWindows Vista Windows XPAdjustment Procedure Perform the auto adjustment Expanding Signal Output Range Range ExtensionDisplaying Screen Correctly Windows Page To adjust color gradation automatically Range Adjustment Adjust the color gradationTo select the display mode Color Mode Color AdjustmentMode Purpose Adjustment items in each mode To perform advanced adjustmentsColor Mode Icon Function To adjust the contrast Contrast To adjust the brightness BrightnessTo adjust the color temperature Temperature To adjust the hue Hue To adjust the gamma value GammaTo adjust the color saturation Saturation To adjust the black level Black Level To adjust the gain value GainTo enhance the outline of the image Outline Enhancer To adjust six colors 6 Colors Menu Function Displaying Lower ResolutionsConfiguring moving image performance Overdrive To change screen size Screen SizeSettings Buttons that can be locked Enabling/Disabling Mode Selection Mode PresetLocking Buttons Key Lock Setting Orientation Orientation Setting the Eizo Logo Display LogoSetting Range of Frequency Signal Bandwidth Setting Language LanguageSelectable languages Sets the brightness of the front buttons Indicator To reset color adjustment values Color Reset Restoring the Default SettingChecking Calibration Results Result Executing SelfCalibration CalibrationSetting Item Setting Range Setting Calibration Details SettingSetting the mode to execute SelfCalibration Mode Selection Setting the calibration targetsSet the monitor date and time Setting the monitor date and time Clock AdjustmentFRI/SAT/SUN Setting the calibration schedule ScheduleSignal inputs Standard Setting the Power Saving Power SaveMonitor Power Indicator Problems Possible cause and remedy No picture TroubleshootingShown below Problems Possible cause and remedy Characters are blurredAfterimages appear Remain on the screenStays out Problems Possible cause and remedyCable is not detected. / USB devices Connected to the monitor does not workAttach the monitor to the arm or stand Attaching an ArmTo switch the input signal Connecting More than Two PCs to the MonitorConnection examples Setting Function To set input signal selection Input SelectionMaking Use of USB Universal Serial Bus Connection Procedure Setup of USB FunctionRequired System Environment Displaying Monitor Information Displaying signal information Signal InfoDisplaying monitor information Monitor Info Specifications USB Main default settings factory settingsUnit mm inch Outside DimensionsContact No Signal Remarks Connector Pin AssignmentPin Signal Pin No SignalGlossary Resolution Hdcp High-bandwidth Digital Contents ProtectionPhase Range AdjustmentTmds Transition Minimized Differential Signaling TemperatureVGA Text Preset TimingFor more information, please visit FCC Declaration of Conformity Hinweis zur Ergonomie Limited Warranty Begrenzte Garantie Garantie Limitée Garantía Limitada Garanzia Limitata Begränsad Garanti Περιορισμενη Εγγυηση Ограниченная Гарантия 有限责任保证书 关于电子信息产品污染控制标识
Top Page Image Contents