Chapter 3 Setting Monitor
3-1. Enabling/Disabling Mode Selection [Mode Preset]
Allows you to select the specified modes only.
Use this function when all the display modes are not available or when keeping the display mode unchanged.
Procedure
1.Choose <Tools> from the Adjustment menu, and press 
.
2.Choose <Mode Preset> from the <Tools> menu, and press
.
3.Select the mode to change its settings with 
or 
, and press 
.
4.Select “On” or “Off” with 
or 
.
5.Press 
to exit the adjustment.
Attention
• You cannot set all the modes disable. Set at least one mode to “On”.
3-2. Locking Buttons [Key Lock]
This function allows you to lock to prevent changing the adjusted/set status.
Procedure
1.Press 
to turn off the monitor.
2.Press 
holding 
down for at least 2 seconds to turn on the monitor.
The Optional Settings menu appears.
3.Choose <Key Lock> from the <Optional Settings> menu, and press 
.
4.Select “Off”, “Menu”, or “All” with 
or 
, and press 
.
Settings | Buttons that can be locked |
Off (Initial settings) | None (All buttons are enabled) |
|
|
Menu | button |
All | All buttons excluding |
5.Select “Finish” with 
or 
.
6.Press 
to exit.
The Optional Settings menu is closed.
Chapter 3 Setting Monitor 27