Attention
•This function works correctly when an image is fully displayed over the Windows or Macintosh display area. It does not work properly when an image is displayed only on a part of the screen (command prompt window, for example) or when a black background (wallpaper, etc.) is in use.
•This function does not work correctly with some graphics boards.
If the screen is not displayed correctly even after adjusting in step 1 above, perform the adjustments according to the procedures on the following pages. When the screen is displayed correctly, go to step 5 “To adjust color gradation automatically [Range Adjustment]”.
2Prepare the display pattern for the analog display adjustment.
Windows
1.Load the “EIZO LCD Utility Disk” to your PC.
2.Start the “Screen Adjustment Utility” from the startup menu. If it cannot be started, open the screen adjustment pattern files.
Tips
• For details and instructions on opening the “Screen adjustment pattern files”, refer to the “Readme.txt” file.
Other than Windows
Download the “Screen adjustment pattern files” from our site: http://www.eizo.com
Tips
• For details and instructions on opening the “Screen adjustment pattern files”, refer to the “Readme.txt” file.
3Perform the auto adjustment again with the analog screen adjustment pattern displayed.
●To adjust flickering, screen position, and screen size automatically [Auto Adjustment]
Procedure
1.Display Pattern 1 in full screen on the monitor using the “Screen Adjustment Utility” or the screen adjustment patternfiles.
2.Choose <Screen> from the Adjustment menu, and press 
.
3.Choose <Analog Adjustment> from the <Screen> menu, and press 
.
To proceed with the subsequent adjustments, select an item in <Analog Adjustment> of the <Screen> menu.
4.Choose <Auto Adjustment>, and press 
.
The auto adjustment function works (the message “In Progress” appears) to adjust the flickering, screen position, and screen size correctly.
When the auto adjustment is completed, a message appears. Select “OK” to confirm the new settings or “Cancel” to restore the previous settings, and press 
.
If the screen is not displayed correctly even after adjusting in step 3 above, perform the adjustments according to the procedures on the following pages. When the screen is displayed correctly, go to step 5 “To adjust color gradation automatically [Range Adjustment]”.
Chapter 2 Adjusting Screen 17