Eizo CG245W user manual Setting the calibration schedule Schedule, Fri/Sat/Sun

●Setting the calibration schedule [Schedule]

Set the calibration schedule for SelfCalibration.

Attention

• Clock adjustment is necessary for SelfCalibration to operate.

Procedure

1.Choose <Setting> from the SelfCalibration menu, and press .

2.Choose <Schedule> from the Setting menu, and press . The schedule setting menu is displayed.

3.Select the items to change with or , and press .

Setting Item	Setting Range		Setting
Starting Time	Off	Set the timing at which SelfCalibration is executed.
	Power Save	Off	: SelfCalibration is not executed.
	Immediately	Power Save	: When the time period set in the schedule
			has elapsed, it is executed if the mode
			initially switches to power save, or if the
			power initially switches off.
		Immediately	: When the time period set in the schedule
			has elapsed, it is executed immediately.
Setting Type	Type1	Set according to the frequency at which SelfCalibration is
	Type2	executed.
	Type3	Type1 : Once every few months
		Type2 : Once every few weeks
		Type3 : Once every few hours (monitor usage time)
Interval	Type1 : 1 - 12 months	Set the interval between the completed SelfCalibration and
	Type2 : 1 - 5 weeks	the next execution. The setting details differ depending on
	Type3 : 50 - 500 h	the type of <Setting Type> specified.
Week	1st week - 5th week	Set which week to execute SelfCalibration on for the month
		in which calibration is executed.
Day	MON/TUE/WED/THU/	Set which day to execute SelfCalibration on for the week in
	FRI/SAT/SUN	which calibration is executed.
Time	00:00 - 23:30	Set the time at which SelfCalibration is executed.

*1 Settings that are used frequently can be preset.

4.Adjust using or .

5.Press to exit the adjustment. The calibration schedule is set.

NOTE

•The schedule can be set using ColorNavigator. Refer to the ColorNavigator User’s Manual on the CD-ROM.

•When the starting time is [Immediately], and the setting type is either [Type1] or [Type2], SelfCalibration is

executed according to schedule even if the power is switched off using .

•When the starting time is “Off”, the SelfCalibration menu shows “Setting Incomplete.” However, SelfCalibration can be executed manually.

Chapter 4 SelfCalibration 35