Eizo CG245W user manual FCC Declaration of Conformity

Page 54

For U.S.A. , Canada, etc. (rated 100-120 Vac) Only

FCC Declaration of Conformity

We, the Responsible Party	EIZO NANAO TECHNOLOGIES INC.
	5710 Warland Drive, Cypress, CA 90630
	Phone: (562) 431-5011
declare that the product	Trade name: EIZO
	Model: ColorEdge CG245W

is in conformity with Part 15 of the FCC Rules. Operation of this product is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures.

*Reorient or relocate the receiving antenna.

*Increase the separation between the equipment and receiver.

*Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

*Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note

Use the attached specified cable below or EIZO signal cable with this monitor so as to keep interference within the limits of a Class B digital device.

-AC Cord

-Shielded Signal Cable (Enclosed)

Canadian Notice

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de le classe B est comforme à la norme NMB-003 du Canada.

54

Image 54

Contents Page Location of Caution Statement Page LCD Panel CabinetContents HinweiseHinweise zur Auswahl des richtigen Features IntroductionControls and Functions Disk contents and software overview Utility DiskTo use ColorNavigator Adjusting/Setting Basic Operation and FunctionsDisplaying Menu Showing Button Guide ExitingFunctions Calibration Adjusting Screen Setting Screen ResolutionWindows XP WindowsWindows Vista Mac OSExpanding Signal Output Range Range Extension Adjustment Procedure Perform the auto adjustmentDisplaying Screen Correctly Windows Page Adjust the color gradation To adjust color gradation automatically Range AdjustmentColor Adjustment To select the display mode Color ModeMode Purpose To perform advanced adjustments Adjustment items in each modeColor Mode Icon Function To adjust the brightness Brightness To adjust the contrast ContrastTo adjust the color temperature Temperature To adjust the gamma value Gamma To adjust the hue HueTo adjust the color saturation Saturation To adjust the gain value Gain To adjust the black level Black LevelTo enhance the outline of the image Outline Enhancer To adjust six colors 6 Colors To change screen size Screen Size Displaying Lower ResolutionsConfiguring moving image performance Overdrive Menu FunctionEnabling/Disabling Mode Selection Mode Preset Settings Buttons that can be lockedLocking Buttons Key Lock Setting the Eizo Logo Display Logo Setting Orientation OrientationSetting Language Language Setting Range of Frequency Signal BandwidthSelectable languages Sets the brightness of the front buttons Indicator Restoring the Default Setting To reset color adjustment values Color ResetExecuting SelfCalibration Calibration Checking Calibration Results ResultSetting the calibration targets Setting Calibration Details SettingSetting the mode to execute SelfCalibration Mode Selection Setting Item Setting RangeSetting the monitor date and time Clock Adjustment Set the monitor date and timeSetting the calibration schedule Schedule FRI/SAT/SUNSetting the Power Saving Power Save Signal inputs StandardMonitor Power Indicator Troubleshooting Problems Possible cause and remedy No pictureRemain on the screen Problems Possible cause and remedy Characters are blurredAfterimages appear Shown belowConnected to the monitor does not work Problems Possible cause and remedyCable is not detected. / USB devices Stays outAttaching an Arm Attach the monitor to the arm or standConnecting More than Two PCs to the Monitor To switch the input signalConnection examples To set input signal selection Input Selection Setting FunctionConnection Procedure Setup of USB Function Making Use of USB Universal Serial BusRequired System Environment Displaying signal information Signal Info Displaying Monitor InformationDisplaying monitor information Monitor Info Specifications Main default settings factory settings USBOutside Dimensions Unit mm inchPin No Signal Connector Pin AssignmentPin Signal Contact No Signal RemarksGlossary Range Adjustment Hdcp High-bandwidth Digital Contents ProtectionPhase ResolutionTemperature Tmds Transition Minimized Differential SignalingPreset Timing VGA TextFor more information, please visit FCC Declaration of Conformity Hinweis zur Ergonomie Limited Warranty Begrenzte Garantie Garantie Limitée Garantía Limitada Garanzia Limitata Begränsad Garanti Περιορισμενη Εγγυηση Ограниченная Гарантия 有限责任保证书关于电子信息产品污染控制标识