EnGenius Technologies IEEE 802.11b Outdoor Wireless Client Bridge user manual Upgrade the Firmware

Page 10

2.4.7 Upgrade the Firmware

„Setup your TFTP Server

The Trivial File Transfer Protocol (TFTP) Server allows you to transfer files across a network. You can download the firmware files for Wireless client bridge upgrades.

After the TFTP Server is installed, make sure you have the proper TFTP Server IP address, the proper Wireless client bridge firmware files, and the TFTP Server is operational.

„Update the Firmware using the TFTP method

Step 1 Enter the Utility > Software Upgrade page as shown in the figure below, and can use TFTP to upgrade Wireless client bridge. Here, user must specify the TFTP server IP and select which file you want to upgrade it (Program image, Web image), then click OK button to start the TFTP upgrade process.

Step 2 If the upgrade process is success, the Wireless client bridge will apply the new settings and start rebooting right away.

Hint: You must set up a TFTP Server and this server must contain the latest new image files.

„Upgrade the Firmware using RS-232 console

Please refer to Provision 2.4.3 that introduces how to use RS-232 console port.

„Identify the IP Address assigned to the unit.

Step 1 If the connection is normal, when the Wireless client bridge is powered up, the “Current Network Status” will be displayed as

Version 1.02

16

Version 1.02

17

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Ieee 802.11b Outdoor Wireless Client Bridge Product Features Introduction Introducing the Wireless client bridgePackage Contents System Requirements Inline Power Injector PoEInstallation and Basic Configuration Before You Start„ Interface on the Wireless client bridge Unit Before After „ Interface on the Inline Power InjectorPreparing Installation Move to page /Utility/Administration/, select Basic ConfigurationBasic Configuration Steps What you need to know„ Web Access Procedures Login into the Web Interface„ Web Configuration „ Identify the IP Address assigned to the unit„ Web Configuration Structure Set IP Address, Subnet Mask, Default Route IP„ Host Information Set Wireless Encryption for Wireless Interface Change Supervisor Account & Password„ Update the Firmware using the Tftp method Upgrade the Firmware„ Setup your Tftp Server „ Upgrade the Firmware using RS-232 consoleVersion „ Downloading Configuration Files Back-up the Wireless client bridge’s Configuration Files„ Uploading Configuration Files Network Topologies Wireless Client Bridge-to-Central Wireless BridgeRemarks Version Wireless Client Router-to-Central Wireless Router Configure Community Pool Network Parameters IP ConfigurationConfigure Snmp „ Wireless Client BridgeConfigure Trap Host Pool Configure Wireless related parameters Software Upgrade UtilityMonitor Information Administration„ Services Information „ General System InformationStatistic Information System InformationStatistic of Interface Site Survey Wireless Link Information Specifications Hardware Specifications System Software SpecificationsDefault Settings General Configuration Snmp Table of Snmp Community PoolWireless LAN Table of Snmp Trap Community Host Pool„ Radiation Exposure Statement Regulatory Compliance Information„ Radio Frequency Interference Requirements „ Interference Statement„ Professional Installation „ European Community CE Notice Marking by the symbol：
Top Page Image Contents