EnGenius Technologies IEEE 802.11b Outdoor Wireless Client Bridge Configure Trap Host Pool

Page 17

4.2.2 Configure Trap Host Pool

The Trap Host Pool has five entries.

1.To modify a entry, click the select button beside the entry index number and click Modify . The configuration page appears as following figure.

2.Specify the Version, IP Address and Community field.

9Version. Select Disable, Version 1 or Version 2 to control this trap host.

9IP Address. Enter the Trap Host IP Address.

9Community. Enter the password in this field.

3.Click OK to refresh the current trap host pool.

4.To modify another trap host entry to the current trap host pool, repeat step 1 through step 3.

5.When you have modified all the entries preferred, click FINISH.

Version 1.02

30

Version 1.02

31

Page 16 Page 18
Image 17
Page 16 Page 18
Contents
Ieee 802.11b Outdoor Wireless Client Bridge Package Contents Introduction Introducing the Wireless client bridgeProduct Features Installation and Basic Configuration Inline Power Injector PoESystem Requirements Before You StartBefore After „ Interface on the Inline Power Injector „ Interface on the Wireless client bridge UnitPreparing Installation Basic Configuration Steps Basic ConfigurationMove to page /Utility/Administration/, select What you need to know„ Web Configuration Login into the Web Interface„ Web Access Procedures „ Identify the IP Address assigned to the unit„ Host Information Set IP Address, Subnet Mask, Default Route IP„ Web Configuration Structure Change Supervisor Account & Password Set Wireless Encryption for Wireless Interface„ Setup your Tftp Server Upgrade the Firmware„ Update the Firmware using the Tftp method „ Upgrade the Firmware using RS-232 consoleVersion „ Uploading Configuration Files Back-up the Wireless client bridge’s Configuration Files„ Downloading Configuration Files Remarks Wireless Client Bridge-to-Central Wireless BridgeNetwork Topologies Version Wireless Client Router-to-Central Wireless Router Configure Snmp Network Parameters IP ConfigurationConfigure Community Pool „ Wireless Client BridgeConfigure Trap Host Pool Configure Wireless related parameters Utility Software Upgrade„ Services Information AdministrationMonitor Information „ General System InformationStatistic of Interface System InformationStatistic Information Site Survey Wireless Link Information Specifications Hardware Specifications Default Settings General Configuration Software SpecificationsSystem Snmp Table of Snmp Community PoolTable of Snmp Trap Community Host Pool Wireless LAN„ Radio Frequency Interference Requirements Regulatory Compliance Information„ Radiation Exposure Statement „ Interference Statement„ European Community CE Notice Marking by the symbol： „ Professional Installation
Related manuals
Manual 27 pages 26.16 Kb