Chapter 3
Configuring the ANG-1000 with Aurorean Web Config
1Click the Internet Setup menu option.
The Internet Setup window appears as shown in Figure 21.
| Aurorean Network Gateway 1000 | |
Help | Internet Setup | |
| ||
VPN | Internet Address Assignment: | |
| ||
VPN Status | DHCP assigned IP address | |
VPN Setup | Hostname: | |
| ||
Connectivity Setup | Use Hostname with DHCP | |
Internet Setup |
| |
LAN Setup | Manual assigned IP address | |
Firewall Setup | IP Address: | |
| ||
| Subnet: | |
Set Password | Gateway: | |
Device Status | ||
Primary DNS: | ||
Firmware Update | ||
Advanced Utilities | Secondary DNS: | |
| ||
Links | PPPoE assigned address | |
Config File Editor | ||
Username: | ||
Aurorean Products | ||
Enterasys Home | Password: | |
| ||
| Confirm: | |
| Apply | |
| Figure 21 Internet Setup Window |
2Do one of the following:
H Click the DHCP radio button and perform the following steps:
–Enter a Hostname for the system.
–Optionally, check the Use hostname with DHCP checkbox.
–Click Apply.
HClick the Manual assigned IP address radio button and perform the following steps:
–Specify the
–Set the Subnet mask.
Aurorean Network | 21 |