Enterasys Networks ANG-1000 manual Setting Your Password, Click the Set Password menu option

Chapter 3

Configuring the ANG-1000 with Aurorean Web Config

Setting Your Password

To further ensure security for your ANG-1000, you should configure a new password to replace the factory-installed password netadmin.

Change the Password by performing the following steps:

1Click the Set Password menu option.

The Set Password window appears as shown in Figure 24.

	Aurorean Network Gateway 1000
Help	Set Password
VPN	Old password:
VPN Status	New password:
VPN Setup
	Confirm:
Connectivity Setup
Internet Setup	Apply
	Figure 24 Set Password Window

2Type the old Password in the field provided.

3Type a new Password in the field provided.

4Confirm the new password in the field provided.

5Click Apply.

Aurorean Network Gateway-1000 User’s Guide 27