Enterasys Networks ANG-1000 manual Click the Configuration Edit menu option

Chapter 3

Configuring the ANG-1000 with Aurorean Web Config

1Click the Configuration Edit menu option.

The Configuration Edit window appears as shown in Figure 28.

	Aurorean Network Gateway 1000
Help	Configuration File Edit
	This Web application allows you to update and delete the system configuration
Configuration Files	files of the ANG-1000. These files are used to control the ANG-1000 for its VPN
config	functionality, Internet and LAN connectivity, firewall capabilities, networking
inittab	startup commands and other key features of the ANG-1000 device.
ipfwrules	Extreme caution needs to be exercised when modifying the system
options
ripd.conf	configuration files of the ANG-1000. The raw contents of the files are exposed
start	for updating and improper editing could render the ANG-1000 inoperable. Bear
zebra.conf	this in mind as you use this Web application.
ipfwrule.routing	When the configuration files are modified, the ANG-1000 device may need to
dhcpd.conf
dhcpd.iplist	be rebooted in order for the changes to take effect. Other modifications to
config.ike	configuration files can be made and their effects will be seen in the running
hosts	system. If you are not clear as to which type of change you are making, be sure
pppoe	to click the “Reboot Now” button when prompted.
winsd.conf	This list of files on the left displays the files contained in the ANG-1000 RAM-
,netrc
.resolv.conf	based configuration file directory /etc/config. Most of these files contain
config.dat	editable text, but some of them are stored as binary data and cannot be edited.
dhcpd-cache.eth1
hostinfo-eth1
dhcpd.leases
	Figure 28 Configuration Edit Window

2Click on the command of your choice.

3The arguments of the command you selected are displayed in the Configuration File Edit window, as shown in Figure 29.

Aurorean Network Gateway-1000 User’s Guide 33