Enterasys Networks ANG-1100 manual Setting Your Password, Click the Set Password menu option

Chapter 3

Configuring the ANG-1100 with Aurorean Web Config

Setting Your Password

Because the default password is readily available through all ANG-1100 documentation, we strongly recommend that you ensure security by configuring a new password to replace the default password netadmin.

NOTE

If you forget your password after changing it from the factory default, you can return to using netadmin by pressing the Reset button and reinstate all factory default values.

Change the Password by performing the following steps:

1Click the Set Password menu option.

The Set Password window appears as shown in Figure 12.

Aurorean Network Gateway

Help	Set Password
VPN	Old password:
VPN Status	New password:
VPN Setup
	Confirm:
Connectivity Setup
Internet Setup	Apply

Figure 12 Set Password Window

2Type the old Password in the field provided.

3Type a new Password in the field provided.

4Confirm the new password in the field provided.

5Click Apply.

14 Aurorean Network Gateway-1100 User’s Guide