Enterasys Networks ANG-1100 manual Image Date and Build Information

Page 37

Chapter 3

Configuring the ANG-1100 with Aurorean Web Config

7After downloading and “flashing” are complete, a status page displays as shown in Figure 18 indicating the process was successful and displays the FTP server IP address and new build filepath.

Help

VPN

VPN Status

VPN Setup

Connectivity Setup

Internet Setup

LAN Setup

Firewall Setup

ANG-1100 System

Set Password

Device Status

Firmware Update

Advanced Utilities

Links

Aurorean Network Gateway

Firmware Update

The Aurorean Network Gateway 1100 has been updated with the changes you have selected. The following list shows the modifications that have been made:

Download new firmware image

FTP server: 146.34.69.128

Filepath: NewBuild/Build87/ANG1100-1.0.00-87.bin

Username: anonymous

The Aurorean Network Gateway 1100 needs to be rebooted in order to run with the changes you have selected. Press the “Reboot Now” button below to reboot the ANG-1100.

Reboot Now

<<Back

Figure 18 Successful Firmware Update Window

8Reboot the ANG by clicking Reboot Now.

Power and VPN LEDs turn off; then the Power LED turns on for about 4 seconds. Once the kernel is up, the Power LED blinks every half-second. The VPN LED then turns on when the tunnel comes up.

9To ensure that the image was updated, compare the date last modified, Release, Build and Patch numbers in the lower left corner of the VPN Status window as shown in Figure 19 with the previous release information. The Device Status window also lists this data.

Aurorean Network Gateway Release 2.1 Patch 00 Build 154 (3.5)

Page last modified Wed October 24 16:52:37 EDT 2001

© 2000, 2001 Enterasys Networks. All rights reserved

Figure 19 Image Date and Build Information

Aurorean Network Gateway-1100 User’s Guide

25

Image 37

Contents Aurorean Virtual Network ANG-1100 User’s GuideAurorean Network Gateway-1100 User’s Guide Iii Important Safety Instructions Table of Contents Table of Contents Configuring the ANG-1100 with Aurorean WebUnited States Government Restricted Rights Page About This Guide Contents of the GuideConventions Used in This Guide About This Guide Related Publications Related PublicationsPage System Description OverviewSystem Description ANG-1102/1105 TopologyUnpacking the ANG-1102/1105 InstallationLocation Planning AccessoriesUnpacking the ANG-1102/1105 Chapter Connecting Cables Connecting CablesEthernet Connections ANG-3000/7000 Do one of the following as shown in FigureAurorean Network Serial Connection Reset TER NALConnecting Power to the ANG-1102/1105 Chapter Connecting Power to the ANG-1102/1105Connecting Power to the ANG-1102/1105 Connecting the Power Cable to the Power SupplyLED behavior Checking ANG-1102/1105 ConnectionsChecking ANG-1102/1105 Connections Chapter Before You Begin Configuring the ANG-1100 with Aurorean Web ConfigConfiguring the ANG-1100 with Aurorean Web Config To log into Web Config, perform the steps below Logging into Web ConfigLogin window appears as shown in Figure VPN Status window appears as shown in FigureClick the Set Password menu option Setting Your PasswordSet Password window appears as shown in Figure Set PasswordVPN Status Viewing VPN StatusClick the VPN Setup menu option Setting Up the VPNVPN Setup window appears as shown in Figure Assigned VPN Connections Aurorean Network Gateway VPN SetupSelect one of the following Connection modes Click Apply Click the Internet Setup menu option Setting Up the Internet ConnectionInternet Setup window appears as shown in Figure Internet Setup Internet Setup Window Do one of the followingConfiguring the ANG-1100 with Aurorean Web Config Firmware Upgrade window appears as shown in Figure Click the Firmware Upgrade menu optionFirmware Update window appears as shown in Figure Firmware UpdateSecond Firmware Update Window Image Date and Build Information Aurorean Network Gateway Firmware UpdateClick the LAN Setup menu option Setting Up the LANLAN Setup window appears as shown in Figure LAN SetupConfiguring the ANG-1100 with Aurorean Web Config Setting Up the Firewall Click the Firewall Setup menu option Begin Firewall Setup by performing the following stepsFirewall Setup window appears as shown in Figure Firewall SetupSetting Your Password Set Password Window Click the Device Status menu option Checking Device StatusDevice Status window appears as shown in Figure Device Status Window Route Table Network DevicesInterrupts System LogAdvanced Utilities window appears as shown in Figure Using Advanced UtilitiesAdvanced Utilities Using the Configuration Editor Configuration Edit window appears as shown in Figure Click the Configuration Edit menu optionConfiguring the ANG-1100 with Aurorean Web Config Configuring IP Port Forwarding Switch Arg Definition Follow the steps below to configure IP port forwardingUsage Example Page Glossary Aurorean Web ConfigAurorean Network Gateway Aurorean Policy ServerFirewall EthernetGeneric Routing Encapsulation GRE Internet Service Provider ISPIP Address IP Security Protocol IPSecLEDs Network Address Translation NAT Network AdministratorMac Address Point-to-Point Protocol PPP Point of Presence POPPoint-to-Point Tunneling Protocol Pptp PPPoETunneling RoutersVirtual Private Network VPN This appendix details the specifications of the ANG-1100 SpecificationsCategory Parameters Specifications Vcci Page Pin Assignments Ethernet Port Pin Assignments Pin SignalSerial Port Pin Assignments DB-9Page Enterasys Networks, Inc. Program License Agreement Program License Agreement SupportOther Restrictions LicenseApplicable Law Export RequirementsUnited States Government Restricted Rights Exclusion of WarrantyUnited States Government Restricted Rights Technical Support No Liability for Consequential DamagesSupport from Enterasys Networks Technical Support Returning Products for RepairPage VPN LED IndexLAN IndexPOP Index