Enterasys Networks ANG-1100 manual Setting Up the LAN, Click the LAN Setup menu option

Chapter 3

Configuring the ANG-1100 with Aurorean Web Config

Setting Up the LAN

LAN configuration of the Trusted side of the ANG-1100 involves choosing either to manually set an IP address and subnet for the ANG-1100 or dynamically assign its IP address via your network’s DHCP server. The factory default LAN setting configures the ANG as a DHCP server on the trusted LAN and automatically assign IP addresses to local PCs. Usually, this setting need not be modified. Begin LAN Setup by performing the following steps:

1Click the LAN Setup menu option.

The LAN Setup window appears as shown in Figure 20.

	Aurorean Network Gateway
Help	LAN Setup
VPN	LAN Address Assignment:
VPN Status	DHCP assigned IP address
VPN Setup	Manual assigned IP address
Connectivity Setup
	IP address:	192	168	1	1
Internet Setup
	Subnet:		255	255	0
LAN Setup		255
Firewall Setup		DHCP server enabled
ANG-1100 System		Starting IP address:
Set Password		192	168	1	100
Device Status		Number of IP addresses:
Firmware Update		100
Advanced Utilities
		Enable DNS proxy
Links		Enable WINS proxy

Config File Editor Apply

Figure 20 LAN Setup Window

2Do one of the following:

!Click the DHCP assigned IP address radio button and perform the following steps:

– Click Apply.

26 Aurorean Network Gateway-1100 User’s Guide