Enterasys Networks ANG-1100 manual Downloading the Latest Firmware, Firmware Update

Page 35

Chapter 3

Configuring the ANG-1100 with Aurorean Web Config

Downloading the Latest Firmware

After logging in, download the latest firmware image to the

ANG-1100’s flash memory (provided the MAC address is set for cable service users - refer to page 36) by accessing the FTP server where it is stored. As new firmware becomes available, you can update it again. Begin updating your firmware by performing the following steps:

1Click the Firmware Upgrade menu option.

The Firmware Upgrade window appears as shown in Figure 16.

 

Aurorean Network Gateway

Help

Firmware Update

VPN

FTP server:

ang.enterasys.com

Firmware image

 

VPN Status

ANG1100/ANG1100.bin

VPN Setup

filepath:

 

Username:

anonymous

Connectivity Setup

Password:

 

Internet Setup

 

LAN Setup

Confirm:

Firewall Setup

Apply

 

 

 

Figure 16 Firmware Update Window

2In the FTP server field, enter the name of the FTP server where the new ANG image is stored: ang.enterasys.com

3Type the full path of the location of the Firmware image:

/ANG1100/ANG1100.bin

4Enter the Username anonymous

5Enter netadmin in the Password and Confirm fields and click Apply.

The Firmware Update window appears as shown in Figure 17.

6Click Apply.

Depending on your network connection, the image (nearly 2 MB) downloads for 20-30 seconds and loads in flash memory for 2-3 minutes more. Note that the Power and VPN LEDs blink very quickly together during this interval and then turn off. The WAN LED blinks as well. Meanwhile, the ANG Web Config screen appears blank.

Aurorean Network Gateway-1100 User’s Guide

23

Page 34 Page 36
Image 35
Page 34 Page 36
Contents Aurorean Virtual Network ANG-1100 User’s GuideAurorean Network Gateway-1100 User’s Guide Iii Important Safety Instructions Table of Contents Table of Contents Configuring the ANG-1100 with Aurorean WebUnited States Government Restricted Rights Page About This Guide Contents of the GuideConventions Used in This Guide About This Guide Related Publications Related PublicationsPage System Description OverviewSystem Description ANG-1102/1105 TopologyUnpacking the ANG-1102/1105 InstallationUnpacking the ANG-1102/1105 Chapter AccessoriesLocation Planning Ethernet Connections Connecting CablesConnecting Cables Aurorean Network Do one of the following as shown in FigureANG-3000/7000 Serial Connection Reset TER NALConnecting Power to the ANG-1102/1105 Chapter Connecting Power to the ANG-1102/1105Connecting Power to the ANG-1102/1105 Connecting the Power Cable to the Power SupplyChecking ANG-1102/1105 Connections Chapter Checking ANG-1102/1105 ConnectionsLED behavior Before You Begin Configuring the ANG-1100 with Aurorean Web ConfigConfiguring the ANG-1100 with Aurorean Web Config VPN Status window appears as shown in Figure Logging into Web ConfigTo log into Web Config, perform the steps below Login window appears as shown in FigureSet Password Setting Your PasswordClick the Set Password menu option Set Password window appears as shown in FigureVPN Status Viewing VPN StatusVPN Setup window appears as shown in Figure Setting Up the VPNClick the VPN Setup menu option Assigned VPN Connections Aurorean Network Gateway VPN SetupSelect one of the following Connection modes Click Apply Internet Setup window appears as shown in Figure Setting Up the Internet ConnectionClick the Internet Setup menu option Internet Setup Internet Setup Window Do one of the followingConfiguring the ANG-1100 with Aurorean Web Config Firmware Update Click the Firmware Upgrade menu optionFirmware Upgrade window appears as shown in Figure Firmware Update window appears as shown in FigureSecond Firmware Update Window Image Date and Build Information Aurorean Network Gateway Firmware UpdateLAN Setup Setting Up the LANClick the LAN Setup menu option LAN Setup window appears as shown in FigureConfiguring the ANG-1100 with Aurorean Web Config Setting Up the Firewall Firewall Setup Begin Firewall Setup by performing the following stepsClick the Firewall Setup menu option Firewall Setup window appears as shown in FigureSetting Your Password Set Password Window Device Status window appears as shown in Figure Checking Device StatusClick the Device Status menu option Device Status Window System Log Network DevicesRoute Table InterruptsAdvanced Utilities Using Advanced UtilitiesAdvanced Utilities window appears as shown in Figure Using the Configuration Editor Configuration Edit window appears as shown in Figure Click the Configuration Edit menu optionConfiguring the ANG-1100 with Aurorean Web Config Configuring IP Port Forwarding Usage Follow the steps below to configure IP port forwardingSwitch Arg Definition Example Page Aurorean Policy Server Aurorean Web ConfigGlossary Aurorean Network GatewayFirewall EthernetIP Security Protocol IPSec Internet Service Provider ISPGeneric Routing Encapsulation GRE IP AddressMac Address Network Address Translation NAT Network AdministratorLEDs PPPoE Point of Presence POPPoint-to-Point Protocol PPP Point-to-Point Tunneling Protocol PptpVirtual Private Network VPN RoutersTunneling Category Parameters SpecificationsThis appendix details the specifications of the ANG-1100 Specifications Vcci Page Pin Assignments Ethernet Port Pin Assignments Pin SignalSerial Port Pin Assignments DB-9Page Enterasys Networks, Inc. Program License Agreement Program License Agreement SupportExport Requirements LicenseOther Restrictions Applicable LawUnited States Government Restricted Rights Exclusion of WarrantyUnited States Government Restricted Rights Support from Enterasys Networks No Liability for Consequential DamagesTechnical Support Technical Support Returning Products for RepairPage VPN LED IndexLAN IndexPOP Index
Top Page Image Contents