Enterasys Networks ANG-1100 manual Setting Your Password

Chapter 3

Configuring the ANG-1100 with Aurorean Web Config

NOTE

If you press the Reset button after you have configured your ANG-1100, you will lose your entire configuration. Any settings you have changed from factory defaults, such as firewall rules, will be removed. We recommend that you save these settings to a Notepad file which you then can reference if you are compelled to use the Reset button.

Setting Your Password

Because the default password is readily available through all ANG-1100 documentation, we strongly recommend that you ensure security by configuring a new password to replace the default password netadmin.

NOTE

If you forget your password after changing it from the factory default, you can return to using netadmin by pressing the Reset button and return to all factory default values.

Change the Password by performing the following steps:

1Click the Set Password menu option.

The Set Password window appears as shown in Figure 22.

30 Aurorean Network Gateway-1100 User’s Guide