Verifying the installation | TX 4000 PCI SS7 Network Interface Board Installation Manual |
Status LEDs
After the boot code LEDs become green, the status LEDs are active and indicate the current board status as described in the following table:
LED | Color | Status when illuminated |
number |
|
|
|
|
|
D8 | Green | Timer interrupt controlled heartbeat. The LED flickers to show that the timer |
|
| interrupts are operating properly. |
|
|
|
D9 | Green | Idle task controlled heartbeat. The LED flickers to show that the |
|
| system is operational. |
|
|
|
D12 | Red | The board is executing in snapshot mode: the board is resetting or txsnap is |
|
| running. |
|
|
|
D13 | Reserved for internal use. | |
|
|
|
D18 | Red | The kernel detected a host communication error. |
|
|
|
D19 | Red | A memory full condition occurred on the board. |
|
|
|
D20 | Red | An unexpected exception occurred on the board. |
|
|
|
D21 | Red | The kernel detected a problem. Use the cpcon utility's log command to view logged |
|
| error information. For information about using cpcon, refer to the Dialogic® TX |
|
| Series SS7 Boards TX Utilities Manual. |
|
|
|
40 | Dialogic Corporation |