TX 4000 PCI SS7 Network Interface Board Installation Manual | Configuring the TX 4000 board |
Saving configuration changes
In a Windows system, any changes that you make to the configuration information with the txcpcfg utility are saved automatically.
In a UNIX system, changes that you make to the configuration information with the txcpcfg utility are deleted when you restart the system. Save the changes by editing the cpcfg file as described in the following procedure:
Step
Action
1
At the prompt in the UNIX system, view the current configuration updates by entering the following command:
txcpcfg
txcpcfg displays the bus number, slot number, CP number, and CP model type of each TX board in the system. For example:
Bus | Slot | CP Number | CP Model | |
2 | 2 | 1 | TX | 4000 |
2 | 8 | 3 | TX | 4000 |
2
3
Using a text editor, open the cpcfg configuration file. The file contains the original configuration information that existed before you ran the txcpcfg utility and made changes. For example:
# Command | Bus | Slot | CP Number |
txcpcfg | 2 | 2 | 1 |
txcpcfg | 2 | 8 | 2 |
Note: The cpcfg file does not specify the CP model type. The model type is automatically determined each time the host operating system is booted.
Following the cpcfg file format, edit the entry in the cpcfg file for the TX board CP number that you are updating. If you are adding a new board, add a new txcpcfg entry to the cpcfg file.
Continuing with the example in step 1, the board with a CP number of 2 is updated to reflect the new CP number of 3.
# Command | Bus | Slot | CP Number |
txcpcfg | 2 | 2 | 1 |
txcpcfg | 2 | 8 | 3 |
4
Save and close the cpcfg file.
The cpcfg script executes as part of the boot process and applies the new configuration settings.
Dialogic Corporation | 27 |