Dialogic TX4000 PCI SS7 Hardware specifications, General hardware specifications, Physical

Page 43

7	Hardware specifications

General hardware specifications

This topic describes the following types of hardware specifications:

•Physical

•Host interface

•H.100 compliant interface

•Environment

•Software environment

•Power requirements

•Connectivity

Physical

Feature	Specification

Form factor	Standard length PCI board

PCI bus	33/66 MHz, 32-bit master/target or slave 5.0 V or 3.3 V signaling compatible slot

Input/output	PCI end bracket

Board weight	0.40 lb (0.20 kg)

Host interface

Feature	Specification

Electrical	PCI bus designed to PCI Local Bus Specification Revision 2.2

Mechanical	Designed to PCI Local Bus Specification Revision 2.2

Bus speed	DC to 66 MHz

Maximum number of boards per chassis	16

Maximum number of SS7 links per board	32 per TX 4000 board
	16 per TX 4000/20 board

I/O mapped memory	Memory mapped interface for efficient block data transfers

Plug and play	Compatible (Windows only)

Dialogic Corporation

43

Image 43

Contents July Copyright and legal notices Revision Release date Revision historyPage Table Of Contents Hardware specifications Current terminology IntroductionPage Overview of the TX TX 4000 board featuresBoard TX 4000 board provides PCI bus connectivity Software components Utility Description Utilities and demonstration programsProgram Demonstrates how to Page System requirements Installing the TX 4000 boardStep Description For details, refer to Installation summaryConfiguring H.100 bus termination Configuring the hardwareConfiguring SS7 Monitor mode DIP switch S1 Step Action Installing the boardUsing the configuration utility Configuring the TX 4000 boardDirectory Txcpcfg Assigning a CP numberAdding a board Changing a CP number Txcpcfg bus slot updatedCPnumberMoving a board Removing a board # Command Bus Slot CP Number Txcpcfg Saving configuration changesPage Dialogic MD1 RJ-45 interface Connectors and cablesEstablishing network ConnectionsEthernet interfaces Dual T1/E1 120 ohm adapter cableConnecting to the network T1 network considerations E1 network considerationsTesting in loopback mode TDM configuration Connecting TX boards for redundancyIP network configuration Single-node redundant signaling serverDual-node redundant signaling server Off Trunk has not been configured Verifying the installationExternal connection status LEDs Following table describes the functionality of each LED Ethernet LEDsBoard status LEDs Boot code LedsStatus LEDs Color Status when illuminated NumberVerifying the board installation Page Physical Hardware specificationsGeneral hardware specifications Feature SpecificationSoftware environment Power requirementsCompliant interface EnvironmentDSX-1 telephony interface Cept E1 G.703 telephony interfacePage Index Sigtran