Eaton Electrical BladeUPS Bar manual Wireway Tab Attachment

INSTALLATION

16.Install two M4×8 pan-head screws into the tab on the wireway floor, securing the base of the bar to the wireway. See Figure 7. Torque the screws to 1.7 ± 0.2 Nm (15 ± 2 lb in).

Rear of Rack

M4×8 Pan-Head Screws (2 places)

Wireway Floor Tab

(above bar base sheetmetal)

Figure 7. Wireway Tab Attachment

12 EATON Powerware® BladeUPS® Bar Installation Guide S 164201723 Rev P01