Cyclades PM IPDU manual Getting Started, Supplied with the PM Ipdu

13

CHAPTER

2

Installation

Getting Started

Collect the following equipment prior to installing and configuring the Cyclades PM IPDU in standalone configuration:

•One or more RJ-45 to RJ-45 straight-through cables

•An RJ-45 to DB-9F straight-through adaptor

•A PC running a terminal emulation program

See the following section for the list of other necessary items that come with the PM IPDU.

Supplied with the PM IPDU

All PM IPDU models are shipped with the PM IPDU itself along with the items shown in

Table 2.1. The entry for each part provides an illustration, its part number (P/N), description, and purpose. You may use check boxes to check off each item, and you may use the part numbers from this table to reorder any of the parts.

Table 2.1: PM IPDU Shipping Box Contents, Part Numbers and Description

P/N	Description	Purpose
PAC0225	Cyclades PM IPDU Quick	Basic installation guide for experienced users in
	Start Guide	printed format.
CAB0018	RJ-45 to RJ-45 7ft. straight through	Used for the following:
	CAT5 cable	Along with an adaptor, to connect a terminal or PC to
		the IN port. See To access the console: on page 21.
		To connect to a Cyclades console or KVM
		management device.
		To connect to another Cyclades PM IPDU in a daisy
		chain. See To daisy chain a PM IPDU: on page 19.
ADB0200	RJ-45 to DB-9F straight-	Along with an RJ-45 cable, used to connect a terminal
	through adaptor	or PC to a PC’s COM port. See To access the console:
		on page 21.