32Cyclades PM IPDU Installer/Administrator/User Guide
Logging in to the PM IPDU
After the Username: prompt, enter your username.
NOTE: If there are daisy chained PM IPDUs, you will need to press Enter after the final [PM]: OUT: line appears.
After the Password: prompt, enter the password for the unsername entered.
The default user is admin and the default password is pm8.
After a successful login, the PM IPDU command prompt appears after which you may use any of the commands described in this chapter.
After logging in, the administrator may choose to change his or her password through the passwd command (seen later). Passwords may be set to null, which indicates that no password is needed.
Commands
All commands are available to the admin user, and most commands are available to regular users as well.
Table 4.1: User Commands
Regular User Command | Regular User Command |
|
|
current on page 35 | off on page 49 |
|
|
currseg on page 37 | on on page 50 |
|
|
cycle on page 38 | passwd on page 50 |
|
|
exit on page 41 | status on page 54 |
|
|
help on page 42 | temperature on page 56 |
|
|
humidity on page 43 | unlock on page 57 |
|
|
interval on page 46 | ver on page 59 |
|
|
list on page 47 | voltage on page 60 |
|
|
lock on page 48 | whoami on page 61 |
|
|