Chapter 4: Command Line Interface | 41 |
|
|
To view the display status, enter the following.
pm>display
IPDU #1: Display mode set to normal.
IPDU #2: Display mode set to 180 degrees rotated.
IPDU #3: Display mode set to show current and cycle each 2 seconds.
exit
The exit command exits the session.
Syntax
exit
Arguments
none
Examples
To exit the current session, enter the following.
pm>exit
AlterPath PM
Copyright (c)
V 1.9.0 Jun 21, 2006
Username:
factory_defaults
The factory_defaults command resets the unit to its factory configuration so that all outlets are on, unlocked, unnamed, and no users are created. When used with a daisy chain, and no argument is given, this command resets all units in the chain. This command is available to the admin user only.
Syntax
factory_defaults [<IPDU#><IPDU_ID>]
Arguments
no argument resets all PM IPDUs in the daisy chain to factory default
<IPDU#> number of the PM IPDU in the chain
<IPDU_ID> Identification string previously set by the id command