Bay Technical Associates DS72 owner manual Appendix B, Fixed Serial Port Rate default

Page 32

DS-SERIES OWNER’S MANUAL

APPENDIX B

APPENDIX B

OPERATING WITH A MODEM

U.S. ROBOTIC MODEMS

COMMAND	INTERPRETATION

AT&B1	Fixed Serial Port Rate (default)

AT&C1	Normal CD Operations (default)

AT&D2	Normal DTR Operations (default)

ATS0=1	Auto answer telephone line in 4 or fewer rings

ATE0	Modem does not display keyboard commands.

ATQ1	Place modem into quiet mode

AT&W0	Save the modem’s configuration in non-volatile memory

NOTE: To send all of the above at the same time, type the following command: AT&B1&C1&D2S0=1E0Q1&W0

ROCKWELL CHIP SET MODEMS

COMMAND	INTERPRETATION

ATS23=59	Fixed Serial Port Rate (default)

AT&C1	Normal CD Operations (default)

AT&D2	Normal DTR Operations (default)

ATS0=1	Auto answer telephone line in 4 or fewer rings

ATE0	Modem does not display keyboard commands

ATQ1	Place modem into quiet mode

AT&W0	Save modem’s configuration in non-volatile memory

NOTE: To send all of the above at the same time, type the following command: ATS23=59&C1&D2S0=1E0Q1&W0

27

Image 32

Contents BayTech Manual Publication #U140A127 October Page Iii Table of Contents REPACKAGING, Shipping and Returning to the Factory Programmable Features of the DS72 Introduction to the DS72 Network Interface ModuleControl Port Access Power DSUDS72 Quick Start Getting StartedEnter IP address in dotted decimal form Installation Preparing the Installation SitePower UnpackingDS72 EIA-232 RJ-45 Pin/Signal Definition Pin EIA-232 Description SignalCabling RJ-45 Cables and AdaptersCabling Menu Detailed Operation and ConfigurationAccessing Main Mode Binary Mode$BT2,1cr$BTBcr Terminate Binary Status DS72 responds Requested Connection Made. Send the AsciiAppears for the DS72 For For 57.6K a for 76.8K B for 115.2K Enter Request Name is EIA-232 Code Default Port Select Code is $BTPort Select Character Disconnect TimeGuard Connect PortHeader Login SetupDefault Header is enabled Password MenuIf enabled, the following header and menu appears Auto Connect PortAuto Connect Port is disabled ConfigurationNetwork Port IP AddressGateway Before the DS-Series can be accessed through the networkSubnet Mask Unit ID Unit Reset SystemNetwork Logged UsersDiagnostics AsciiCharacter Indication InterpretationTechnical Support Call BayTech to get a Return Authorization Number REPACKAGING, Shipping and Returning to the FactoryFCC Radio Frequency Interface Statement Specifications DS72 Network Interface ModuleFixed Serial Port Rate default Appendix BAppendix B Index Break condition

Related manuals

Manual 38 pages 49.39 Kb