Buffalo Technology WBR2-G54S user manual Simple Security Setup

Page 20

Standard Settings

Encryption Setup.

-Select the desired encryption scheme from the choices. After it has been selected, press the ‘Next’ button. You will then be prompted to enter the appropriate key(s) for that method of encryp- tion.

Simple MAC Address Filter.

- Select ‘Enable’ to use MAC ﬁ lter- ing. See ‘Page 36’ for more infor- mation on MAC Address Filtering.

Simple Security Setup.

-See ‘Page 55’ for more information on Intrusion Detector.

20

Image 20

Contents WBR2-G54S Table of Contents Network Settings Table of Contents Introduction Introduction Home Networking SOHO/SMB NetworkingAirStation WBR2-G54S Package Contents System RequirementsProduct Views About the AirStation CD Installation / Setup Introduction Setup PreparationSetup Overview Antenna Installation Standard Settings Open the Setup ScreenAutomatic IP Assignment by ISP Enter ISP informationDSL Button Enter IP Address Manually PPPoE Connection Catv Cable Button Line Test Security Simple Security Setup Applications Refer to the on-screen help for Aoss Aoss Additional Aoss Information Advanced Settings LAN SettingsWireless Settings Wireless Function Enable orAdvanced Settings Wireless LAN Security Advanced Settings Characteristics Advanced Settings LAN Port Dhcp Server Advanced Settings Manual IP MAC Address Assignment Settings Wireless MAC Filter Wireless PC’s ConnectionRegister for Allowable PC’s MAC Address Wireless Bridge WDS Advanced Settings WAN Port WAN SettingsWired WAN Performance Connection Type Select from MTU Maximum Transmit MRU Maximum ReceiveWAN Network Advanced Settings Network Settings Routing SetupAdd Routing Table Entry IP Masquerade When Enable or Disable . AddressAddress Translation Display/Delete NAT Table Add NAT Table Advanced Settings Packet Filter Log Output Select Output toBasic Filter Setting IP Filter Setting MAC Filter Click Enter MAC Lter to enter MAC address Click Apply when settings are complete Intrusion Detector DETECTOR@AIRSTATIONPage UPnP Management System InformationAdmin Name Password NTP server name Enter Time setupSelect Use or Do not use Wired WAN Wired LAN Wireless LAN Packet Trafﬁc InformationClient Monitor IP Address and MediumPing Test Log information Displays Log InformationDisplay log info Select Log Information Select Syslog TransferLog Information Level Restored saved settings Save/Restore SettingsSave current settings Click AirStation Reboot/Reload DefaultsClick Restart to reboot Firmware ﬁle name Firmware UpdateCom/wireless Aoss Client Table DisplaysAoss Function Click Enable Manually specify the encrypTemperature & Humidity Power CharacteristicsSpeciﬁcations Additional InformationNetworking Characteristics Radio CharacteristicsRegulatory Information Host Operating SystemOpen Ofﬁce Environment Semi-Open Ofﬁce Environment 2412 Troubleshooting Common ProblemsLED Activity B Diag LED ActivityLEDs Work But Client PC Cannot Connect to Network Changing Client TCP/IP Settings in WindowsTable B.1.1 Diag LED Activity Table Other Problems Restrictions ProblemCause Proper Setup Click on the ‘LAN port’ link on the left Troubleshooting Troubleshooting Glossary Glossary MHz MegaHertz One million cycles per second PCI Peripheral Component Interconnect a ROM Read Only Memory Permanent memoryGlossary Glossary FCC / CE Information Federal Communication Commission Interference StatementImportant Note Federal Communication Commission Interference StatementFCC RF Radiation Exposure Statement EU Countries intended for useEU Countries Not intended for use Potential restrictive useWarranty Information Contact Information General Inquiries4030 W. Braker Ln. Suite Austin, Texas Tel Fax