Buffalo Technology WBR2-G54S user manual Product Views

Page 9

Introduction

The LAN or Wired MAC address is the default SSID (SSID) of the AirStation. The LAN MAC address is clearly labeled on the back of the AirStation.

Product Views

Power - Lit when the device is powered on.

Wireless - Lit when the wireless radio is on. Flashes when

wireless trafﬁc is present.

WAN - Lit when connection to Cable/DSL modem is present.

Flashes when internet trafﬁc is present.

Diag - Flashes red when performing diagnostic functions.

AOSS - Flashes when in AOSS mode, solid when AOSS

encryption has been set.

Ethernet - 1, 2, 3, or 4 lit when ethernet clients are connected.

Flashes when ethernet trafﬁc is present.

9

Image 9

Contents WBR2-G54S Table of Contents Network Settings Table of Contents Introduction Introduction SOHO/SMB Networking Home NetworkingSystem Requirements AirStation WBR2-G54S Package ContentsProduct Views About the AirStation CD Installation / Setup Setup Preparation Setup OverviewIntroduction Antenna Installation Open the Setup Screen Standard SettingsEnter ISP information DSL ButtonAutomatic IP Assignment by ISP PPPoE Connection Enter IP Address ManuallyCatv Cable Button Line Test Security Simple Security Setup Applications Refer to the on-screen help for Aoss Aoss Additional Aoss Information LAN Settings Advanced SettingsWireless Settings Wireless Function Enable orAdvanced Settings Wireless LAN Security Advanced Settings Characteristics Advanced Settings LAN Port Dhcp Server Advanced Settings Manual IP MAC Address Assignment Settings Wireless PC’s Connection Wireless MAC FilterRegister for Allowable PC’s MAC Address Wireless Bridge WDS Advanced Settings WAN Settings Wired WAN PerformanceWAN Port Connection Type Select from MRU Maximum Receive MTU Maximum TransmitWAN Network Advanced Settings Routing Setup Network SettingsAdd Routing Table Entry Enable or Disable . Address Address TranslationIP Masquerade When Display/Delete NAT Table Add NAT Table Advanced Settings Log Output Select Output to Packet FilterBasic Filter Setting IP Filter Setting MAC Filter Click Enter MAC Lter to enter MAC address Click Apply when settings are complete DETECTOR@AIRSTATION Intrusion DetectorPage UPnP System Information ManagementAdmin Name Password Time setup Select Use or Do not useNTP server name Enter Packet Trafﬁc Information Wired WAN Wired LAN Wireless LANIP Address and Medium Client MonitorPing Test Log Information Display log info SelectLog information Displays Syslog Transfer Log Information LevelLog Information Select Save/Restore Settings Save current settings ClickRestored saved settings Reboot/Reload Defaults Click Restart to rebootAirStation Firmware Update Com/wirelessFirmware ﬁle name Client Table Displays AossManually specify the encryp Aoss Function Click EnablePower Characteristics Temperature & HumiditySpeciﬁcations Additional InformationRadio Characteristics Networking CharacteristicsRegulatory Information Host Operating SystemOpen Ofﬁce Environment Semi-Open Ofﬁce Environment 2412 Common Problems TroubleshootingLED Activity B Diag LED ActivityChanging Client TCP/IP Settings in Windows Table B.1.1 Diag LED Activity TableLEDs Work But Client PC Cannot Connect to Network Other Problems Problem CauseRestrictions Proper Setup Click on the ‘LAN port’ link on the left Troubleshooting Troubleshooting Glossary Glossary MHz MegaHertz One million cycles per second ROM Read Only Memory Permanent memory PCI Peripheral Component Interconnect aGlossary Glossary Federal Communication Commission Interference Statement FCC / CE InformationFederal Communication Commission Interference Statement Important NoteEU Countries intended for use FCC RF Radiation Exposure StatementEU Countries Not intended for use Potential restrictive useWarranty Information General Inquiries Contact Information4030 W. Braker Ln. Suite Austin, Texas Tel Fax