Buffalo Technology WBR2-G54S user manual Semi-Open Office Environment

Page 74

Specifications

400 m (1300 ft.)

550 m (1750 ft.)

Semi-Open Office Environment

50 m (165 ft.)

70 m (230 ft.)

90 m (300 ft.)

115 m (375 ft.)

Closed Office

25 m (80 ft.)

35 m (115 ft.)

40 m (130 ft.)

50 m (165 ft.)

Receiver Sensitivity -83 dBm -87 dBm -91 dBm -94 dBm (depends on data rate)

Delay Spread (at FER of <1%) 65 ns 225 ns 400 ns 500 ns (depends on data rate)

The range of wireless devices can be affected by metal surfaces, solid high-density materials and obstacles in the signal path.

74

Image 74
Contents WBR2-G54S Table of Contents Network Settings Table of Contents Introduction Introduction Home Networking SOHO/SMB NetworkingAirStation WBR2-G54S Package Contents System RequirementsProduct Views About the AirStation CD Installation / Setup Introduction Setup PreparationSetup Overview Antenna Installation Standard Settings Open the Setup ScreenAutomatic IP Assignment by ISP Enter ISP informationDSL Button Enter IP Address Manually PPPoE ConnectionCatv Cable Button Line Test Security Simple Security Setup Applications Refer to the on-screen help for Aoss Aoss Additional Aoss Information Wireless Settings Advanced SettingsLAN Settings Wireless Function Enable orAdvanced Settings Wireless LAN Security Advanced Settings Characteristics Advanced Settings LAN Port Dhcp Server Advanced Settings Manual IP MAC Address Assignment Settings Wireless MAC Filter Wireless PC’s ConnectionRegister for Allowable PC’s MAC Address Wireless Bridge WDS Advanced Settings WAN Port WAN SettingsWired WAN Performance Connection Type Select from MTU Maximum Transmit MRU Maximum ReceiveWAN Network Advanced Settings Network Settings Routing SetupAdd Routing Table Entry IP Masquerade When Enable or Disable . AddressAddress Translation Display/Delete NAT Table Add NAT Table Advanced Settings Packet Filter Log Output Select Output toBasic Filter Setting IP Filter Setting MAC Filter Click Enter MAC Lter to enter MAC address Click Apply when settings are complete Intrusion Detector DETECTOR@AIRSTATIONPage UPnP Management System InformationAdmin Name Password NTP server name Enter Time setupSelect Use or Do not use Wired WAN Wired LAN Wireless LAN Packet Traffic InformationClient Monitor IP Address and MediumPing Test Log information Displays Log InformationDisplay log info Select Log Information Select Syslog TransferLog Information Level Restored saved settings Save/Restore SettingsSave current settings Click AirStation Reboot/Reload DefaultsClick Restart to reboot Firmware file name Firmware UpdateCom/wireless Aoss Client Table DisplaysAoss Function Click Enable Manually specify the encrypSpecifications Temperature & HumidityPower Characteristics Additional InformationRegulatory Information Networking CharacteristicsRadio Characteristics Host Operating SystemOpen Office Environment Semi-Open Office Environment 2412 LED Activity B TroubleshootingCommon Problems Diag LED ActivityLEDs Work But Client PC Cannot Connect to Network Changing Client TCP/IP Settings in WindowsTable B.1.1 Diag LED Activity Table Other Problems Restrictions ProblemCause Proper Setup Click on the ‘LAN port’ link on the left Troubleshooting Troubleshooting Glossary Glossary MHz MegaHertz One million cycles per second PCI Peripheral Component Interconnect a ROM Read Only Memory Permanent memoryGlossary Glossary FCC / CE Information Federal Communication Commission Interference StatementImportant Note Federal Communication Commission Interference StatementEU Countries Not intended for use FCC RF Radiation Exposure StatementEU Countries intended for use Potential restrictive useWarranty Information Contact Information General Inquiries4030 W. Braker Ln. Suite Austin, Texas Tel Fax