Buffalo Technology WBR2-G54S user manual Connection Type Select from

Page 41

Advanced Settings

PPPoE Setting (for enabling PPPoE Client function) - Allows administrator to use PPPoE as specifi ed by the ISP.

The following parameters should be entered for PPPoE Settings:

Name of Connection - Enter the name of your connection.

User Name - Enter the user name (up to 64 alphanumeric characters) for PPPoE authorization.

Password - Enter the password provided by your ISP (up to 64 alphanumeric characters). Reenter the password in the Confi rmation box.

Service Name - Enter the PPPoE service name (up to 64 alphanumeric characters). If your ISP doesn’t require a service name, then leave it blank.

Connection Type - Select from:

-Continuous Connection - connects immediately after setting and never disconnects.

-Connect on Demand - Reconnects when the disconnect time elapses.

-Manual - Disables Automatic Connection. Connects to the Internet using the connect button on the initial settings page.

The Enter New Connection button will not appear until Use PPPoE Client is set.

Disconnection Time - Specify the number of minutes (0-1440) before automatic disconnect is performed. If “0” is entered, the disconnect function is disabled. If Continuous Connection is selected, the timer is disabled.

41

Page 40 Page 42
Image 41
Page 40 Page 42
Contents WBR2-G54S Table of Contents Network Settings Table of Contents Introduction Introduction SOHO/SMB Networking Home NetworkingSystem Requirements AirStation WBR2-G54S Package ContentsProduct Views About the AirStation CD Installation / Setup Introduction Setup PreparationSetup Overview Antenna Installation Open the Setup Screen Standard SettingsAutomatic IP Assignment by ISP Enter ISP informationDSL Button PPPoE Connection Enter IP Address ManuallyCatv Cable Button Line Test Security Simple Security Setup Applications Refer to the on-screen help for Aoss Aoss Additional Aoss Information LAN Settings Advanced SettingsWireless Settings Wireless Function Enable orAdvanced Settings Wireless LAN Security Advanced Settings Characteristics Advanced Settings LAN Port Dhcp Server Advanced Settings Manual IP MAC Address Assignment Settings Wireless PC’s Connection Wireless MAC FilterRegister for Allowable PC’s MAC Address Wireless Bridge WDS Advanced Settings WAN Port WAN SettingsWired WAN Performance Connection Type Select from MRU Maximum Receive MTU Maximum TransmitWAN Network Advanced Settings Routing Setup Network SettingsAdd Routing Table Entry IP Masquerade When Enable or Disable . AddressAddress Translation Display/Delete NAT Table Add NAT Table Advanced Settings Log Output Select Output to Packet FilterBasic Filter Setting IP Filter Setting MAC Filter Click Enter MAC Lter to enter MAC address Click Apply when settings are complete DETECTOR@AIRSTATION Intrusion DetectorPage UPnP System Information ManagementAdmin Name Password NTP server name Enter Time setupSelect Use or Do not use Packet Traffic Information Wired WAN Wired LAN Wireless LANIP Address and Medium Client MonitorPing Test Log information Displays Log InformationDisplay log info Select Log Information Select Syslog TransferLog Information Level Restored saved settings Save/Restore SettingsSave current settings Click AirStation Reboot/Reload DefaultsClick Restart to reboot Firmware file name Firmware UpdateCom/wireless Client Table Displays AossManually specify the encryp Aoss Function Click EnablePower Characteristics Temperature & HumiditySpecifications Additional InformationRadio Characteristics Networking CharacteristicsRegulatory Information Host Operating SystemOpen Office Environment Semi-Open Office Environment 2412 Common Problems TroubleshootingLED Activity B Diag LED ActivityLEDs Work But Client PC Cannot Connect to Network Changing Client TCP/IP Settings in WindowsTable B.1.1 Diag LED Activity Table Other Problems Restrictions ProblemCause Proper Setup Click on the ‘LAN port’ link on the left Troubleshooting Troubleshooting Glossary Glossary MHz MegaHertz One million cycles per second ROM Read Only Memory Permanent memory PCI Peripheral Component Interconnect aGlossary Glossary Federal Communication Commission Interference Statement FCC / CE InformationFederal Communication Commission Interference Statement Important NoteEU Countries intended for use FCC RF Radiation Exposure StatementEU Countries Not intended for use Potential restrictive useWarranty Information General Inquiries Contact Information4030 W. Braker Ln. Suite Austin, Texas Tel Fax
Top Page Image Contents